From | Message |
spkdtch2 Dodge Dakota JOIN HERE
3/11/2008 19:56:07
|
Subject: check codes IP: Logged
Message: theres a way to check the trouble codes with out the code reader, you turn the key to on, then off, then on, then off, then on and leave it, and its supposed 2 give u a number in the odometer and thats the error code
nothing happens when i do that, any other ways to get it to show up? i dont wanna drive to an autostore where they will do it, i wanna learn how to do it this way
help?
|
Mikey Dodge Dakota JOIN HERE
3/11/2008 21:19:50
| RE: check codes IP: Logged
Message: Yes, turn the ignition on/off 3 times quickly and leave it in the on position. Then watch the "check engine" light to blink....they are 2 digit codes such as 2 blinks then 2 blinks is code 22 (coolant temp sensor). When it gets to 55....self diagnostics are finished.
Mikey
|
spkdtch2 Dodge Dakota JOIN HERE
3/12/2008 07:56:10
| RE: check codes IP: Logged
Message: i tried that and nothing flashed or showed up or changed, i did the process a few times
i have a 01 v6 3.9 l
any other ways or tips?
and i just turn the key so the lights come on right, i dont turn the engine on, then off, then on...etc correct?
|
daddio Dodge Dakota JOIN HERE
3/12/2008 08:28:43
| RE: check codes IP: Logged
Message: the key trick works on your '01 for sure. you must have done something wrong. turn the key on/off/on/off/on in 10 seconds or less. the codes will display in the odometer as PXXXX then display Pdone when its finished or no codes stored.
"and i just turn the key so the lights come on right, i dont turn the engine on, then off, then on...etc correct?"
correct, turn the key on until all the warning lights come on. i use it all the time on my '00.
|
spkdtch2 Dodge Dakota JOIN HERE
3/12/2008 09:50:57
| RE: check codes IP: Logged
Message: i tried that, and waited for a few sec, might have only been 8 or 9 sec with my luck hah
but i kno what the problem is, i just want to learn how to read the codes, i started my truck with the ait sensor unplugged accidentally, caught it right away but still, wanna learn how to read the codes
also read that sometimes for whatever reason, it works for some people with doing the cycle 10times instead of 3, either way ima tinker with it and try it til i get it, its something handy to learn how to do
|
daddio Dodge Dakota JOIN HERE
3/12/2008 10:37:01
| RE: check codes IP: Logged
Message: it should work just as i explained. i have heard that it doesn't work on the '99's for some reason but i've done it on '00 - '02's so i know it works liek that.
|
spkdtch2 Dodge Dakota JOIN HERE
3/12/2008 10:39:08
| RE: check codes IP: Logged
Message: alright, maybe like i said i should have waited another 2second or so, ill try it again and find out what will make it work, im determined
|
dakota49 Dodge Dakota JOIN HERE
3/12/2008 15:33:52
| RE: check codes IP: Logged
Message: On the early Dak's, the check engine light would flash, on the 92's I think they started using the odometer, like daddio said, it should show a "P" then a number, when done, or if no codes, Pdone.
Dakota49
|
fotodak Dodge Dakota JOIN HERE
3/14/2008 09:19:23
| RE: check codes IP: Logged
Message: Nope, the 92s still use the check engine light.
The procedure should work as described.
|
Erech Hilbun Dodge Dakota JOIN HERE
6/20/2009 16:19:11
| RE: check codes IP: Logged
Message: When I count the blinks, how do I convert the number of blinks to the proper code?
Thanks
|
easy Dodge Dakota JOIN HERE
6/20/2009 22:56:42
| RE: check codes IP: Logged
Message: each "blink" represents a number
example 2 blinks = #2
4 blinks = #4
the codes are then 2 digits each
example 1 blink - 2 blinks = code 12
5 blinks - 5 blinks = code 55
|
Bumper Dodge Dakota JOIN HERE
6/25/2009 21:13:39
| RE: check codes IP: Logged
Message: bump
|
brian1960 Dodge Dakota JOIN HERE
6/26/2009 21:09:24
| RE: check codes IP: Logged
Message: Just checked mine because of transmission problem, on,off,on,off,on and P code comes up in milage display. I have an 02.
|
| P 1 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|