| From | Message |
GMB
Dodge Dakota
JOIN HERE
2/11/2008
12:20:09
|
 Subject: Changing oil sending unit??
IP: Logged
Message:
How difficult is it to change the oil sending unit in a 98 4x4 v6?? How much does a new unit cost??
|
dakota49
Dodge Dakota
JOIN HERE
2/16/2008
14:46:20
|  RE: Changing oil sending unit??
IP: Logged
Message:
The oil sending sensor is at the back of the engine next to the dist. its not real hard to replace, there is a special tool you can buy, or of you have a little patience you can use an ajustable wrench. Just unplug remove, put new one in. As for cost I can't remember what I paid for mine,I think it was 35bucks, again I really can't remember. I replaced mine in 2002.
Call Auto-Zone or some other parts store and if they have one they can tell you how much it cost.
Good Luck
Dakota49
|
Dan M
Dodge Dakota
JOIN HERE
2/16/2008
17:02:19
| RE: Changing oil sending unit??
IP: Logged
Message:
get a socket from napa, it's less than $10 and works perfectly.
- Dan M
|
jacksdodges
GenI
2/18/2008
09:03:07
| RE: Changing oil sending unit??
IP: Logged
Message:
I just did this . the sending unit cost about 20 bucks and be sure to get the socket while your at AZ it is only 6 dollars and its worth ever penny .
jack mcknight
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
