| From | Message |
dddddd
Dodge Dakota
JOIN HERE
2/02/2008
04:44:36
|
 Subject: Muffler Pipe Question
IP: Logged
Message:
I have a 95 3.9 v6 dak how big is a stock muffler pipe? would a two and a half inch pipe be ok? Or would it be to big I know it ain't two and a half stock
|
dakota49
Dodge Dakota
JOIN HERE
2/02/2008
16:14:51
| RE: Muffler Pipe Question
IP: Logged
Message:
I think the stock size is either 2, or 2 1/4, and no 2 1/2 is not too big, in fact if you went from the Y pipe to the tail pipe it would be just right, at least it is on my 1988 3.9.
I had to replace the cat, I used a universal 2 1/2 in/out and 2 1/2 all the way from the Y to the tail pipe all stock location. The Y pipe on mine was 2 1/4 I had a shop step it up to the 2.5.
Good Luck
Dakota49
1988 3.9 4X4 5speed
|
no
Dodge Dakota
JOIN HERE
2/02/2008
20:48:54
| RE: Muffler Pipe Question
IP: Logged
Message:
stock size is 2 1/2
|
daddio
Dodge Dakota
JOIN HERE
2/03/2008
10:10:52
| RE: Muffler Pipe Question
IP: Logged
Message:
yes, stock is 2-1/2".
|
dddddd
Dodge Dakota
JOIN HERE
2/05/2008
05:18:08
| RE: Muffler Pipe Question
IP: Logged
Message:
thanks guys and its ok to run just the pipe without a fresh air kit on the throttle body its ok to run the stock one i will get one soon but i already put the 2 and a half pipe from the y pipe back i was just wondering if it was ok i put one of those little adapters from the y to the 2 and a half
|
dakota49
Dodge Dakota
JOIN HERE
2/05/2008
18:05:33
| RE: Muffler Pipe Question
IP: Logged
Message:
Hey guys, mine was 2 1/4 from the exhaust manifolds to the cat, but mine is an 88, that might be the difference. Now I know the newer ones use the bigger pipe. Thanks for your help in knowing something new.
Good Luck
1988 3.9 4X4 5speed
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
