| From | Message |
5pnt9ltrluv
R/T
 
4/24/2002
23:59:42
|
 Subject: 11.26 second V6 Dakota!!
IP: Logged
Message:
http://www.dragtruk.com/ENTRIES/kramarnick.html
You V6 guys might enjoy this...Maybe even inspire you......
Kris
2002 Atlantic Blue R/T
Current Mods: True dual Flowmaster 40 Series Original (dumped), MSD 6A Ignition w/ Blaster SS coil and Taylor Spirocore 8mm, 360 Intakez w/ 9" K&N, Flowmetrics 50mm billet throttle body, JBA ceramic headers, Autolite 3923's, 180 degree T-stat, TPS @ .725 v
|
LI Blackdak
Dodge Dakota
JOIN HERE
4/25/2002
04:39:06
| RE: 11.26 second V6 Dakota!!
IP: Logged
Message:
that is so last year
ever one knows about that
trick with him is that its a
5.4l V6 TT w/ 175 shot
|
cbsdakota
GenIII
4/25/2002
05:06:08
|  RE: 11.26 second V6 Dakota!!
IP: Logged
Message:
Well, then everyone knows wrong. Stock displacement, and I don't think he used NOS. The 5.4 is a different truck there big guy. The 5.4 ran in the 10's.
Airaid, 50 Series Delta Flow Flowmaster, Lund Elite Bed Cover...
Coming soon: Custom "Fastman" V8 TB (48mm), ignition, 4.10's w/LSD...
|
LI Blackdak
Dodge Dakota
JOIN HERE
4/25/2002
05:38:29
| RE: 11.26 second V6 Dakota!!
IP: Logged
Message:
oh...really
he definatly did use nos though. 175 shot. look
|
LI Blackdak
Dodge Dakota
JOIN HERE
4/25/2002
05:40:48
| RE: 11.26 second V6 Dakota!!
IP: Logged
Message:
All work performed by Bruce Kelly of Scitech Enterprises (Miami, FL)
Scitech Cam
Scitech Head porting and Mopar Valves 2.02 int and 1.68 exh
Scitech Fuel System
Scitech NOS Plate system (175 shot)
Scitech Driveshaft Safety Loop and extended studs
Scitech Twin Turbo system
Scitech Installed Accel D.F.I (Maps by Bruce Kelly)
Scitech Custom 8-point cage (Maybe some day i will break 10's)
Quick - D Throttle Body
Magnum Performance Tourque Converter
Western Chasis Drop Kit 3-5
Dadeland Dodge HD 42re tranny
Weld Wheels with 26 x 10 MT E.T. Drag
Mopar 8 1/4 rear with 4.10 gears
|
LI Blackdak
Dodge Dakota
JOIN HERE
4/25/2002
05:42:38
| RE: 11.26 second V6 Dakota!!
IP: Logged
Message:
All work performed by Bruce Kelly of Scitech Enterprises (Miami, FL)
Scitech Cam
Scitech Head porting and Mopar Valves 2.02 int and 1.68 exh
Scitech Fuel System
Scitech NOS Plate system (175 shot)
Scitech Driveshaft Safety Loop and extended studs
Scitech Twin Turbo system
Scitech Installed Accel D.F.I (Maps by Bruce Kelly)
Scitech Custom 8-point cage (Maybe some day i will break 10's)
Quick - D Throttle Body
Magnum Performance Tourque Converter
Western Chasis Drop Kit 3-5
Dadeland Dodge HD 42re tranny
Weld Wheels with 26 x 10 MT E.T. Drag
Mopar 8 1/4 rear with 4.10 gears
|
5pnt9ltrluv
R/T
4/25/2002
08:29:32
| RE: 11.26 second V6 Dakota!!
IP: Logged
Message:
Well yeah he used NOS, but that alone would not get him to 11.26 seconds. He had some other work done to his engine. including a twin turbo setup...He is pushing well over 500hp. even possibly 325-350 with out the nitrous.
Kris
2002 Atlantic Blue R/T
Current Mods: True dual Flowmaster 40 Series Original (dumped), MSD 6A Ignition w/ Blaster SS coil and Taylor Spirocore 8mm, 360 Intakez w/ 9" K&N, Flowmetrics 50mm billet throttle body, JBA ceramic headers, Autolite 3923's, 180 degree T-stat, TPS @ .725 v
|
bernd
*GenIII*
4/25/2002
09:14:24
| RE: 11.26 second V6 Dakota!!
IP: Logged
Message:
His truck was also totalled. He was selling his engine parts quite some time ago. It was a 3.9L on the bottom end. (He was using the factory pistons, rods, and crank...I spoke with him on this as well.)
1997 Dodge Dakota SLT - V6
Supercharged/Intercooled @ 10# w/Nitrous
14.55 @ 96.01mph
|
LI Blackdak
Dodge Dakota
JOIN HERE
4/25/2002
14:04:19
| RE: 11.26 second V6 Dakota!!
IP: Logged
Message:
he didn't just use n2o, but the twin turbo would have added a lot of hp
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
