| From | Message |
Andrew
Dodge Dakota
JOIN HERE
1/16/2008
00:25:04
|
 Subject: 93 3.9 intake
IP: Logged
Message:
ok now before i start im sure a lot of you are gonna think im stupid for wanting to do this but its what i want... i have a 93 3.9 v6 its a great motor i have had no problems with it, it is currently the multi port injection which all of you should know that.. i want to get rid of all the computer bs is there any way i can transform it into a carburated motor?
|
Kenkura
Dodge Dakota
JOIN HERE
1/16/2008
01:39:48
|  RE: 93 3.9 intake
IP: Logged
Message:
sure but say good by to alot of the magnums good qualities... you can swap the heads and intake to a pre-magnum 3.9L engine and put on a 2bbl carb. and I've heard you can swap the distributor with one from i think a slant 6? correct me if I'm wrong. Lets put it this way a pre-magnum 3.9l puts out 125hp and 180-190ft/lbs of tq, a magnum 3.9l puts out 180ish hp and 230ft/lbs of tq and is gonna have better mileage and throttle response than the carb. why you'd wanna do that i don't know but you can... I have a pre-mag TBI '91 and a '93 with a magnum (doing magnum engine swap into '91 in spring) the power difference is very noticeable..
|
Andrew
Dodge Dakota
JOIN HERE
1/16/2008
02:43:58
| RE: 93 3.9 intake
IP: Logged
Message:
so i cant just swap out the intake? i deff dont want to swap heads... thats where a lot of the magnums power comes from
|
Bob Lincoln
Dodge Dakota
JOIN HERE
1/16/2008
08:24:17
| RE: 93 3.9 intake
IP: Logged
Message:
It will run worse and have less power and gas mileage, so I don't know what you're looking for.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
