From | Message |
cbsdakota GenIII
10/31/2001 05:41:02
|
Subject: Ground Force Suspension IP: Logged
Message: Is the 2" coil front and 3" leaf spring rear drop from Ground Force a decent kit. I don't want to go any lower than this. Was seriously considering the RT suspension but I would like to drop the rear a tad lower to make it level. Still use this as a truck so no 8" slam for me. Any info would be great.
Project QUIKV6
|
DeepDak Dodge Dakota
10/31/2001 14:34:45
| Yup IP: Logged
Message: I have this kit and it performs great. The ride is stiffer than stock but cornering and handling easily make up for it. My front coils ended up dropping a tad more than the 2" so I dropped the rear another 1"(no stinkbug look for me). The rear is still higher than the front but just the right amount IMO. Oh, you will have to buy an extra set of bumpstops since the kit only includes new rear ones. You can purchase these (couple bucks) from the same company you purchase the kit from. Let me know if you have more Qs.
Eli
a.k.a. DeepDak
|
cbsdakota GenIII
11/02/2001 06:06:02
| RE: Ground Force Suspension IP: Logged
Message: Thanks. How did you drop the rear the extra inch? Did you use blocks? I really wanted to stick with just a spring change.
Project QUIKV6
|
DeepDak Dodge Dakota
11/03/2001 13:23:51
| RE: Ground Force Suspension IP: Logged
Message: I used 1" blocks for the rear. My truck is a ClubCab (more weight) which might account for it dropping a little more than advertised. Your Reg Cab might not have the same problem and will not need the blocks.
Eli
|
DeepDak Dodge Dakota JOIN HERE
1/07/2004 18:00:44
| RE: Ground Force Suspension IP: Logged
Message: I used 1" blocks for the rear. My truck is a ClubCab (more weight) which might account for it dropping a little more than advertised. Your Reg Cab might not have the same problem and will not need the blocks.
Eli
|
| P 1 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|