| From | Message |
DavidInOhio
Dodge Dakota
JOIN HERE
11/09/2007
21:01:42
|
 Subject: Tensioner Pulley Change
IP: Logged
Message:
2000 Dodge Dakota 3.9L
Hello to all,
I'll be replacing my tensioner pulley tomorrow. Seems easy enough--just one bolt, but is there anything else to watch out for?
Thanks,
David
|
Jimmy9190
Dodge Dakota
JOIN HERE
11/09/2007
21:28:49
| RE: Tensioner Pulley Change
IP: Logged
Message:
Replaced my tensioner as a whole unit. Only had to remove the coil to get the tensioner assembly out. It was easy. I imagine just replacing the pulley is just the same. I would say use the Napa or dealer parts tho. The one from Autozone did not work right or fit right on my truck. 2001 3.9.
Jimmy
|
dakota49
Dodge Dakota
JOIN HERE
11/10/2007
08:34:57
| RE: Tensioner Pulley Change
IP: Logged
Message:
are you changing the pully because it is noisy? if the pully is good you can change the bearing that's a little cheaper and you are only changing what needs to be changed, but if the ajuster is bad you should change the whole thing.
Good Luck
Dakota49
1988 3.9 4X4 5speed
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
