Forums
Forum Tools
|
 |
23:38:41 - 12/19/2024
V6 Dakotas
| From | Message |
Wadak
GenIII
10/21/2007
14:52:51
|
 Subject: Question for FED
IP: Logged
Message:
Fed,
Did you ever get the lean running condition resolved on your 96 Dak? Just curious.
92 and 97 Daks both with many mods.
|
Fed
GenII
10/21/2007
21:09:13
|  RE: Question for FED
IP: Logged
Message:
yes i did actually... i put in 24 lb. FMS injectors.. now she just needs a fine tuning although i have had the PCM flashed 3 times by Tom Fox. we just cant get her running to full potential
im looking into the new SCT Flash tuner. they might have one available for my particular PCM code very soon!
1996 Dakota CC 3.9 manual
(rebuilt motor at 9.5:1 compression, Hughes 208 V6 cam, milled heads, 1.6 Hughes RRs, ported intake manifold, Tom Fox PCM flash, FMS 24# injectors, K&N FIPK, F&B 48mm tb, MSD coil & wires, underdrive pulleys, JBA ceramic headers, custom y-pipe to 2.5
|
TobyWD40
Dodge Dakota
JOIN HERE
10/22/2007
15:02:03
| RE: Question for FED
IP: Logged
Message:
Nice Truck Fed.
|
Wadak
GenIII
10/24/2007
20:45:52
| RE: Question for FED
IP: Logged
Message:
Fed,
Tell me more about this SCT Flash tuner.
Wadak
92 and 97 Daks both with many mods.
|
Fed
GenII
10/25/2007
15:10:09
| RE: Question for FED
IP: Logged
Message:
it is a hand held tuner that you plug into the OBDII port and tune away... it was released a few months ago and is available for all kinds of 1996-2004 DCX vehicles.
check out the site and forum for more info...
http://sctflash.com/forum/
http://sctflash.com
1996 Dakota CC 3.9 manual
(rebuilt motor at 9.5:1 compression, Hughes 208 V6 cam, milled heads, 1.6 Hughes RRs, ported intake manifold, Tom Fox PCM flash, FMS 24# injectors, K&N FIPK, F&B 48mm tb, MSD coil & wires, underdrive pulleys, JBA ceramic headers, custom y-pipe to 2.5
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
