Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
23:09:27 - 12/19/2024

V6 Dakotas
FromMessage
Mastrofury
Dodge Dakota
JOIN HERE
 Email

10/16/2007
16:10:20

Subject: fault code?
IP: Logged

Message:
32** EGR Solenoid circuit Short or open in the EGR solenoid circuit. Check for loose, broken, or shorted wire in the EGR valve wiring and connectors. Possible air fuel ratio imbalance not detected during diagnosis.


Okay check all wires and connections. all looks fine but keep getting this fault code. Could it be the EGR valve itself? Or is there another way of testing this circut?



Curly
Dodge Dakota
JOIN HERE


10/16/2007
18:02:40

RE: fault code?
IP: Logged

Message:
how many miles on the truck?
you can try taking it out and cleaning it and the passages in the intake

dont forget to reset the pcm or the code will keep tripping



Mastrofury
Dodge Dakota
JOIN HERE
 Email

10/16/2007
18:31:41

RE: fault code?
IP: Logged

Message:
about 120,000 replaced it and new timing chain around 80,000. guess this weekend i will try cleaning it or hell get a new 1 and just replace it and see what that does..



Curly
Dodge Dakota
JOIN HERE


10/16/2007
18:50:48

RE: fault code?
IP: Logged

Message:
do you have an exhaust leak?
loss of back pressure will cause an EGR to not work properly either



Mastrofury
Dodge Dakota
JOIN HERE
 Email

10/16/2007
20:31:50

RE: fault code?
IP: Logged

Message:
no exhaust leaks new JBA headers Magnaflow high flow cat and Flowmaster 50 series single in dual out, V8 TB. Which would expain a loss of back pressure. New O2 sensor. Truck is running good just every once in awhile my check engine light comes on. Only code im showing come up. Only been about 2 weeks since exhaust has been put on so maybe the computer has to relearn things. If not I will change out the EGR valve.



Curly
Dodge Dakota
JOIN HERE


10/16/2007
21:01:43

RE: fault code?
IP: Logged

Message:
try cleaning it first like i was saying
then reset pcm
trips it again ya try a new one
and if it still trips the 32 after that
you'll have to work on some back pressure

I'll be looking for an update
best of luck



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.