| From | Message |
Warren Turner
Dodge Dakota
JOIN HERE
9/17/2007
15:59:34
|
 Subject: Black Magic 150 question...
IP: Logged
Message:
I'm about to install a Black Magic 150 on my 92 V6 Dakota, and was wondering if I should leave the stock fan shroud off after installation, or try to reinstall it over my BM 150?
Thanks in advance for any info!
|
TimG
Dodge Dakota
JOIN HERE
9/20/2007
14:30:34
|  RE: Black Magic 150 question...
IP: Logged
Message:
Leave the shroud off, that fan moves more than enough air.
|
Toby
Dodge Dakota
JOIN HERE
9/20/2007
16:25:52
| RE: Black Magic 150 question...
IP: Logged
Message:
Whats a Black magic 150 and how much does it cost? Thanks
|
J and J Auto
GenII
9/30/2007
03:51:11
| RE: Black Magic 150 question...
IP: Logged
Message:
flexolite electric fan
comes with mounting brakets and builtin thermo
switch to set the fan on off temps
Around $300
Larry
J&J Auto
|
Fed
GenIII
10/01/2007
11:03:27
|  RE: Black Magic 150 question...
IP: Logged
Message:
Larry,
Will that fit my '96?
1999 Dakota CC SLT 5.2 auto
(air intake, 3" magnaflow exhaust)
|
Fed
GenII
10/01/2007
11:17:03
| RE: Black Magic 150 question...
IP: Logged
Message:
there are a bunch of different diameters the fan comes in... which one?
1996 Dakota CC 3.9 manual
(rebuilt motor at 9.5:1 compression, Hughes 208 V6 cam, milled heads, 1.6 Hughes RRs, ported intake manifold, Tom Fox PCM flash, FMS 24# injectors, K&N FIPK, F&B 48mm tb, MSD coil & wires, JBA ceramic headers, custom y-pipe to 2.5" Magnaflow muffler and high flow cat, 4.10 gears, trac-loc posi)
|
Fed
GenII
10/01/2007
11:30:46
| RE: Black Magic 150 question...
IP: Logged
Message:
is this the one you have? or that is the one i would want?
http://store.summitracing.com/partdetail.asp?autofilter=1&part=FLX%2D180&N=700+400226+4294838842+4294891681+4294902510+115&autoview=sku
1996 Dakota CC 3.9 manual
(rebuilt motor at 9.5:1 compression, Hughes 208 V6 cam, milled heads, 1.6 Hughes RRs, ported intake manifold, Tom Fox PCM flash, FMS 24# injectors, K&N FIPK, F&B 48mm tb, MSD coil & wires, JBA ceramic headers, custom y-pipe to 2.5" Magnaflow muffler and high flow cat, 4.10 gears, trac-loc posi)
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
