| From | Message |
KCWW
Dodge Dakota
JOIN HERE
9/15/2007
19:43:54
|
 Subject: govenor pressure sensor and solenoid
IP: Logged
Message:
Great site and lots of helpful info.
From what I've read on other threads, I think I need to replace these due to my '99 V6 not shifting into 2nd (when cold) until high rpm's. Seems like it should shift in 1/2 or 1/3 the time that it does. Does this sound right?
Will I do harm to wait a little while longer (month or two) to change them out?
Too bad I just changed the fluid and filter a couple of months ago!
|
Rich
Dodge Dakota
JOIN HERE
9/15/2007
20:23:51
|  RE: govenor pressure sensor and solenoid
IP: Logged
Message:
I have to change those also, I have waited almost a year. It shifts but not until about 3.5 rpms. I think it's a little annoying but will probably not hurt if you wait a month or two. I have waited because I just don't want to change the fluid again. It's a messy job. You should have a code for that if that's the problem. It is P1762.
|
searay245se
Dodge Dakota
JOIN HERE
9/15/2007
23:22:50
| RE: govenor pressure sensor and solenoid
IP: Logged
Message:
i also have a 99 3.9 auto i dont have this problem yet and hope not to but would like to ask anyone on here if this is a common problem with the 99 dak or if its hit and miss thanks
jeff searay245se
1999 dakota 3.9 auto slt clubcab 4x4
|
J and J Auto
GenII
9/17/2007
01:12:26
| RE: govenor pressure sensor and solenoid
IP: Logged
Message:
All the RE trans have the issue with the sensors
when they work they work well
when they go bad the trans will do all sorts of
strange things I have even gotten new sensors that
were bad but they will exchange them they are also
well aware of this problem
Dealer around $200
Larry
J&J Auto
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
