| From | Message |
bpark
Dodge Dakota
JOIN HERE
7/26/2007
22:27:31
|
 Subject: Flowmaster 40series
IP: Logged
Message:
I own a 2001 3.9 and want to get a flowmaster 40 series exhaust. Dual straight out the back. I was wondering if anyone knew of a site online i could order it. I looked a few places and couldnt find it. Any help is apprieciated. Thanks.
|
Kenkura
Dodge Dakota
JOIN HERE
7/26/2007
22:43:01
| RE: Flowmaster 40series
IP: Logged
Message:
You can always go into and exhaust shop and tell 'em what you'd like done and have them make the cat-back exhaust might even be cheaper than buying a kit that bolts together...
|
GB2000
GenIII
7/27/2007
02:48:30
| RE: Flowmaster 40series
IP: Logged
Message:
Summit Racing and Jegs both carry them I believe...I like ordering from Summit. I'm sure you could also order it from Truck Performance.com as well.
Flowmaster 40's aren't super expensive...I got mine for $107 at the local exhaust shop (that included installation).
|
bpark
Dodge Dakota
JOIN HERE
7/27/2007
09:56:32
| RE: Flowmaster 40series
IP: Logged
Message:
anybody know how the magnaflow system sounds?
|
ImtenseDak
Dodge Dakota
JOIN HERE
8/14/2007
21:10:28
| RE: Flowmaster 40series
IP: Logged
Message:
To bad you wan the dual. Flowmaster has a 3'' kit that I installed and it sounds great. Jegs has it and it's listed for the V8.
|
Gears
Dodge Dakota
JOIN HERE
8/15/2007
16:31:43
| RE: Flowmaster 40series
IP: Logged
Message:
A 3 inch system for a V6 is to big.I know you are talking about a flow master exhaust and I had a gibson but Trust me I found out the hard way, I bought a Gibson 3inch Stainless Steel single exhaust system( big$$) and it really killed the low end tq of the motor.The gibson advertises a "cat back" system and it only the muffler and tail pipe, no intermediate pipe and the clamps/hangers are not stainless. It was also WAY loud. Finally the hanger broke after 3 years and I had reason enough to go with a Dynomax 17748 muffler and a stock tailpipe.Ask Larry what exhaust he uses and it rather conservitive. So don't go to big on the exhaust, even FlowMaster only reccomends a 50 series SUV muffler and a 2 1/2 tailpipe.
|
Gears
Dodge Dakota
JOIN HERE
8/15/2007
16:32:48
| RE: Flowmaster 40series
IP: Logged
Message:
A 3 inch system for a V6 is to big.I know you are talking about a flow master exhaust and I had a gibson but Trust me I found out the hard way, I bought a Gibson 3inch Stainless Steel single exhaust system( big$$) and it really killed the low end tq of the motor.The gibson advertises a "cat back" system and it only the muffler and tail pipe, no intermediate pipe and the clamps/hangers are not stainless. It was also WAY loud. Finally the hanger broke after 3 years and I had reason enough to go with a Dynomax 17748 muffler and a stock tailpipe.Ask Larry what exhaust he uses and it rather conservitive. So don't go to big on the exhaust, even FlowMaster only reccomends a 50 series SUV muffler and a 2 1/2 tailpipe.
|
Problem Child
GenIII
8/15/2007
19:55:18
| RE: Flowmaster 40series
IP: Logged
Message:
I went with the Magnaflow Catback (Single), replaced the cat with a straight pipe. Doesn't do bad, and sounds strong. I really don't see a need for duals with a V6.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
