| From | Message |
nice1
Dodge Dakota
JOIN HERE
7/25/2007
23:26:14
|
 Subject: torque specs
IP: Logged
Message:
anyone know the torque specs for throttle body. i'm hearing what sounds like air sucking in somewhere and i want to check the throttle body. i should just take it off and clean it and put a new gasket on and be done with it. would like the torque specs though, thanks.
|
Kenkura
Dodge Dakota
JOIN HERE
7/26/2007
00:09:56
| RE: torque specs
IP: Logged
Message:
Throttle Body (MPI) Bolts........200 in. lbs.(23 N*m)
Throttle Body (TBI) Bolts........175 in. lbs.(20 N*m)
This is according to my Mopar Street Truck book should apply for all years (the ones shown in my book are for 'reference' and are from 1992 and 2000 service manuals, they are the same)
|
nice1
Dodge Dakota
JOIN HERE
7/26/2007
00:52:57
| RE: torque specs
IP: Logged
Message:
sorry but i'm a bit confused by the MPI & TBI. what are the 4 bolts holding the throttle body to the manifold and there specs?
|
?
Dodge Dakota
JOIN HERE
7/26/2007
09:03:56
| RE: torque specs
IP: Logged
Message:
Don't worry about it .
That is not where the leak is.
More probable - cracked vacuum hose.
Check all hose connections to throttle body
and the other end of these hoses as well.
|
Epyon
Dodge Dakota
JOIN HERE
7/26/2007
11:52:09
| RE: torque specs
IP: Logged
Message:
MPI Multi Port Injection
TBI Throttle Body Injection
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
