| From | Message |
Rich
Dodge Dakota
JOIN HERE
7/24/2007
02:33:12
|
 Subject: rough idle map sensor vacuum line
IP: Logged
Message:
Does anyone know where to get a replacement hose for the map sensor vacuum line on a 01 Dakota 3.9 beside the dealer?
Mine cracked and split and caused a headache for a month until I found it and it solved a very rough idle. I had to tape the splits and it created a temporary fix. Is the silicone versions better for this or should I go with the factory brand?
|
boomer
Dodge Dakota
JOIN HERE
7/24/2007
09:11:05
| RE: rough idle map sensor vacuum line
IP: Logged
Message:
Should be able to get vacuum line from just about any parts store, I know I've seen it at Murray's. just need to know diameter and length.
|
Dan M
Dodge Dakota
JOIN HERE
7/24/2007
11:34:32
| RE: rough idle map sensor vacuum line
IP: Logged
Message:
Like boomer said you can get it at parts stores. be sure to tell them it's vac line. they have vac and fuel lines. you can take yours in as a references. they have a little gauge they stick the hose on to get a size.
they sell it by the foot usually.
-Dan M
|
pete
Dodge Dakota
JOIN HERE
7/24/2007
17:59:38
|  RE: rough idle map sensor vacuum line
IP: Logged
Message:
Check with your local junkyard tell them what exactly what your looking for,you might have to bring sensor and show them vacuum connection you are looking for,they should have it most V-6/3.9L 's with MFI 93-03 have the same little vac hose connection
|
Rich
Dodge Dakota
JOIN HERE
7/24/2007
19:00:06
|  RE: rough idle map sensor vacuum line
IP: Logged
Message:
thanks I got it already from autozone. cost 3.00, not a bad deal
|
Jay
Dodge Dakota
JOIN HERE
8/12/2007
23:33:54
| RE: rough idle map sensor vacuum line
IP: Logged
Message:
Hey guys..
I'm having the same problem with my truck idling rough.. Where abouts is this hose, so I can hopefully find it with a crack or 2 in it??
Thx
Jay
|
Problem Child
GenIII
8/13/2007
18:40:32
| RE: rough idle map sensor vacuum line
IP: Logged
Message:
You have to remove the map sensor to get to it, very small hose, L-Shaped. Just be careful when pulling map sensor off.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
