| From | Message |
robert
Dodge Dakota
JOIN HERE
7/09/2007
22:50:54
|
 Subject: turbo.....good stuff
IP: Logged
Message:
Hey I got my turbo kit worked out, well atleast the piping(hot and cold sides)Now what to do with the fuel rails and regulator? Need adjustable, Also Who is the best to cut the intake and port the heads? Thanks for any help or suggestions.
|
J and J Auto
GenII
7/15/2007
01:21:15
|  RE: turbo.....good stuff
IP: Logged
Message:
what you need is either a rpm switch or boost
switch
turn on an axsilery pump with adj reg raise
10psi for 6 to 8 boost 50 55psi needed here
and you need a blow off valve in the system
injectors to 95 use 21
00 and up go 24
Larry
J&J Auto
|
robert
Dodge Dakota
JOIN HERE
7/15/2007
18:48:04
| RE: turbo.....good stuff
IP: Logged
Message:
Is there no way to just run one big ass fuel pump, use and fmu to spike the pressure, and get another set of fuel rails and regulater? Much more simple and alot of less wiring.
|
screwuphead
Dodge Dakota
JOIN HERE
7/15/2007
23:40:07
| RE: turbo.....good stuff
IP: Logged
Message:
well am sure you can buy a fuel controller to control it but i guess we'll see what Larry says.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
