| From | Message |
LARRY?
Dodge Dakota
JOIN HERE
6/26/2007
20:13:35
|
 Subject: 2001 dakota
IP: Logged
Message:
will the V-8 throttle body fit on an 01...i know you have an older v6
|
daddio
Dodge Dakota
JOIN HERE
6/26/2007
20:31:02
| RE: 2001 dakota
IP: Logged
Message:
i'm not larry but yes it will. use a '96 & up from a 5.2 or 5.9 v8. you may have to change the throttle cable or mod the linkage on the throttle body.
|
thanks
Dodge Dakota
JOIN HERE
6/26/2007
21:16:11
| RE: 2001 dakota
IP: Logged
Message:
i just called my friend @ the salvageyard and he has 77 junk truck i can wrench off of /........thanks
ps im going to get a v6 intake and port and polish ........then port match the v8 tb,,,,,
|
daddio
Dodge Dakota
JOIN HERE
6/26/2007
22:11:08
| RE: 2001 dakota
IP: Logged
Message:
clean up around those injector ports too. and look through some old post here. if you shorten the runners about 1 inch it will help also without hurting the bottom end.
then of course you'll have to do something about the exhaust after that. hiflow cat and a performance muffler.
you can search through old post here if you're not a paying member:
http://www.dodgedakota.net/mark/
|
Ricky
Dodge Dakota
JOIN HERE
7/01/2007
06:44:06
| RE: 2001 dakota
IP: Logged
Message:
I have a '01 Dakota and a '96 v8 throttle body will fit but you'll need to get the throttle cable that goes with the v8 T.B. I personaly have yet to get the cable as iv not made my way to the "pick ya parts" but i have mounted the T.B. on and it fits and all the hoses and cables fit.
|
J and J Auto
GenII
7/03/2007
04:33:09
| RE: 2001 dakota
IP: Logged
Message:
92 to 95 need 92 to 95 V8 body
egr type
96 and up 96 up V8 body
non egr type
do not mod in any way shape or form bolt on as is
they flow 625cfm you do not want any more the F&B
is rated at 660cfm
The stock V6 bodies 42 44mm flow 400 425cfm
there was also a 46mm used on the full size ram V6
this flowed around 500cfm
Larry
J&J Auto
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
