| From | Message |
Canuck Dakota
GenII
6/03/2007
21:30:48
|
 Subject: Stop Pinging!!
IP: Logged
Message:
Have:
Brand new NKG FR5's gaped to 040
MSD coil and 8.5 wires
New cap and router.
New O2 sensors (both b4 and after cat)
And it still happens...
Also headers, F&B TB, and CAI.
Plugs - just pulled Bosh 4+ all light tan.
Installed Superchips 91 oct setting
Pings like sh*t.
Any Ideas?
Work Hard, Drive Harder
|
daddio
Dodge Dakota
JOIN HERE
6/04/2007
09:01:52
| RE: Stop Pinging!!
IP: Logged
Message:
either uninstall the Superchips 91 program or run 93 octane gas. you may also have a vacuumm leak somewhere like the plenum gskt.
|
Canuck Dakota
GenII
6/10/2007
15:46:52
| RE: Stop Pinging!!
IP: Logged
Message:
Plenum good
Saw when changing to F&B TB.
More Ideas?
Work Hard, Drive Harder
|
daddio
Dodge Dakota
JOIN HERE
6/10/2007
15:59:39
| RE: Stop Pinging!!
IP: Logged
Message:
does it ping on 93 ocatne? did you also do the CPS mod?
|
GB2000
GenIII
6/10/2007
19:24:00
| RE: Stop Pinging!!
IP: Logged
Message:
Are you sure the gas is all 91 octane...I think when Daffydak switched to his 91 octane program, he'd put 91 octane in, but still had quite a bit of 87 or 89 octane in and it mixed it just enough that it pinged like a mofo til he added a few bottles of octane booster (til he could fill up with more 91 octane).
Also, here's a site with a lot of good info on what causes pinging and what you can do to avoid it...
http://dodgeram.org/tech/gas/Trouble/ping.htm
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
