| From | Message |
Lucas030787
Dodge Dakota
JOIN HERE
6/03/2007
13:24:10
|
 Subject: thorow out bearing problem?
IP: Logged
Message:
as i am taking off in first gear ill have a bit of a grinding sound with a little shaking. when i shift to second and third it seems like im shifting with out my clutch. as i come to a stop i have to down shift through all gears and if my timing is off at all my transmission seems to lock and i need to shut my truck off pop into gear and then go. also when driving for extended times, especially on highways, if i stop for some reason or another my transmission will grind if i try to go into reverse and wont let me into any other gear unless i let it sit for about an hour. any thoughts could help. i assuming throw out bearing, possibly the pilot bearing or slave cylinder.
feel free to ask for further explanation or if i wasnt clear. i need a fix that i wont be cashing out on. i have a 99 dakota slt v6 5speed
|
daddio
Dodge Dakota
JOIN HERE
6/03/2007
15:19:29
|  RE: thorow out bearing problem?
IP: Logged
Message:
if the clutch is fully disengaging, it sounds like the synchros in the tranny are gone. that would mean time for a rebuild or used form the salvage yard.
|
OBIO3
Dodge Dakota
JOIN HERE
6/03/2007
19:09:19
| RE: thorow out bearing problem?
IP: Logged
Message:
Daddio most likely called it right. I'll ad a cracked finger plate on the pressure plate causing dragging problems so the clutch will not totally release. Would aso explain some vibrating.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
