| From | Message |
stefan
Dodge Dakota
JOIN HERE
5/14/2007
15:04:53
|
 Subject: help!!
IP: Logged
Message:
I have a 1987 dakota w/3.9L and a e.g.r. light that i can't seem to get to reset I cleaned the intake and installed a new e.g.r. how ever the light will not reset ANY IDEAS AT ALL?
|
PETE
Dodge Dakota
JOIN HERE
5/14/2007
15:23:49
|  RE: help!!
IP: Logged
Message:
Last, time I did when I had my 91' I was told theres a counter meter ? I think thats what they call it it's somewhere under your dash needs to be taken down and theres a screw that needs to be turned back or forward not sure though cause I haven't done this since truck retired from severe damage and totaled out thats leaves me to my current 02' SXT Club Cab driver. Take a look in a manual such as HAYNES or CHILTON should give you the exact procedure to do this, what I see as a mechanic lot of people pull dash bulb out and go about there business but if you need to take for dealer service it will show up on there scanner or test equipment.Most autopart stores carry manuals for our trucks or go to public library or a good mechanic if your unsure what to.
|
stefan
Dodge Dakota
JOIN HERE
5/14/2007
16:43:16
|  RE: help!!
IP: Logged
Message:
thanks for help I will check in to that and repost.
|
hey
Dodge Dakota
JOIN HERE
5/14/2007
18:34:00
| RE: help!!
IP: Logged
Message:
did you take the neg cable off the battery for awhile?
|
stefan
Dodge Dakota
JOIN HERE
5/14/2007
19:37:53
| RE: help!!
IP: Logged
Message:
I found the reset button YES thank you for your help.No scan tool needed it is an 87 after all.
|
PETE
Dodge Dakota
JOIN HERE
5/14/2007
20:19:15
| RE: help!!
IP: Logged
Message:
happy truckin' Stefan glad I could help
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
