| From | Message |
GREG K
Dodge Dakota
JOIN HERE
5/12/2007
23:57:27
|
 Subject: HORSEPOWER!!!
IP: Logged
Message:
how can i get more power out of my v6 with alittle money. i have k&n filter with a v8 throttle body along with an 3in single exhaust.
|
well first
Dodge Dakota
JOIN HERE
5/13/2007
09:14:23
|  RE: HORSEPOWER!!!
IP: Logged
Message:
forget horsepower
think trq.!
and low end trq. (you'll be much happier)
now with that said with a 3 inch exhaust on a 3.9
you lost bottom end
2 1/2 works best on these motors
with a high flow converter & performance muffler of your choice
the other thing you can do next is a set of Harland Sharp 1.7 Roller Rocker arms
CPS mod
IAT mod
TPS mod
what year is the truck?
how many miles
a lazy O2 sensor will hurt performance and MPG's also
|
GREGK
Dodge Dakota
JOIN HERE
5/13/2007
09:59:28
| RE: HORSEPOWER!!!
IP: Logged
Message:
MY TRUCK IS A 1992 AND IT HAS 113000 MILES ON IT
|
Shoe
GenIII
 
5/13/2007
10:00:00
| RE: HORSEPOWER!!!
IP: Logged
Message:
Them damn O2 sensors. Mine would cut out at about 65 and up unless you were WOT. Changed them to NGKs and it fixed the problem. I also think that I got a little more performance and gas mileage out of it. I like them.
'97 RC V6, 5spd, soon to be V8, 5spd!
|
Curly
Dodge Dakota
JOIN HERE
5/13/2007
11:40:25
| RE: HORSEPOWER!!!
IP: Logged
Message:
ok 92 only has 1 O2
and yes go with NGK
also check your fuel pressure
if they pump is still original
a good set of wires
cap and rotor (brass inserts)
NAPA carrys echlin all brass inserts and
made in the usa (nice price too)
plugs try NGK FR5's
and like stated earlier
your exhaust is way to big for a 3.9
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
