| From | Message |
screwuphead
Dodge Dakota
JOIN HERE
1/25/2007
13:43:40
|
 Subject: Trouble Codes HELP!
IP: Logged
Message:
Okay i know this means something about my ignition coil, can somebody tell me a little more detail about this error code? Could it be the fact that i havnt changed out my distrubter cap in a while? cause i have the MSD set up, 6a, MSD SS blaster coil, and 8.5mm wires.
I also had the code 1281 pop up first, which is Engine Cold Too Long.
|
?
Dodge Dakota
JOIN HERE
1/26/2007
17:32:31
| RE: Trouble Codes HELP!
IP: Logged
Message:
www.troublecodes.net
|
J and J Auto
GenII
 
1/30/2007
02:26:26
| RE: Trouble Codes HELP!
IP: Logged
Message:
If your running a full flow 180 thermo in a
cold area good luck it will run to cold get
a reg stant 195 it will run 185 188 because
the org thermo was a metered flow design
OBD2 96 and up you need to use the tach adapter
or you will get coil circuit codes all the time
and your computer will never fully learn and
give you the full potential
don't remember the number off hand it will be
listed with the coil and box instructions
around $40
this will solve the probs about 20 min to install
from the code you gave I know your obd2 and the
adapter is needed
Larry
J&J Auto
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
