| From | Message |
naa10
Dodge Dakota
JOIN HERE
11/16/2006
00:18:21
|
 Subject: v-6 more power?
IP: Logged
Message:
ok.. how much more horespower would these give me.. Gibson headers, airaid cold air intake, catback exhaust(ne brand.. i know exhaust doesnt give much to little hp but thought i would add it to the list) and then some type of chip(not sure which yet)
|
bludak
Dodge Dakota
JOIN HERE
11/16/2006
22:32:10
| RE: v-6 more power?
IP: Logged
Message:
Not a whole lot until you let it breathe better with a larger TB, intake port matching and some 1.7 rockers. The superchips programmer may give you 5 HP more. Not a lot for the money spent.
|
naa10
Dodge Dakota
JOIN HERE
11/16/2006
23:16:37
| RE: v-6 more power?
IP: Logged
Message:
u know of ne good places to get these?
|
ES
Dodge Dakota
JOIN HERE
11/17/2006
18:53:02
| RE: v-6 more power?
IP: Logged
Message:
http://summitracing.com for the RRs,http://www.thefastman.com or http://www.fbthrottlebodies.com for the TB.
The gaskets to remove intake manifold and port match u should go to the dealership they sell a higher quality gasket compared to the rubber/cork crap u get from the auto stores.
|
J and J Auto
GenII
11/17/2006
23:17:03
| RE: v-6 more power?
IP: Logged
Message:
Just adding the headers will give you a peak hp
of 180 over the 175 stock
cold air 3 to 4 hp
fastman or F&B 15 to 18 rear wheel
1.7 rockers 15 to 18 rear wheel
but the headers will add 10 to 15 once the intake
side is done
Do the intake side first
do the crank sensor mod and the IAT relocate its
the same as a jet 2 chip does
once all the engine mods are done than upgrade
the computer it will add more timing and fuel to
compliment the increased flow
Larry
J&J Auto
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
