| From | Message |
Adam
Dodge Dakota
JOIN HERE
11/13/2006
22:14:02
|
 Subject: V8 TB or F&B?
IP: Logged
Message:
I have the V8 TB right now and was wondering what the difference would be if I went to the f&b. Thanks
'00 3.9
|
J and J Auto
GenII
11/13/2006
22:32:31
| RE: V8 TB or F&B?
IP: Logged
Message:
The V8 50mm plate over the 48mm bore in the
intake creates a low end flow problem
Low end will remain the same some even show a
low in off idle low end torque
From arond 2200 2500 on up hardly no diff
The F&B or the fastman will show gains from
off idle to redline you will notice the low end
gains
The fastman and F&B are very close but the F&B
on every V6 always shows about 8 to 10 foot
pounds of torque over the fastman hp the same
the F&B also is a little crisper with throttle
response down low
Larry
J&J Auto
|
naa10
Dodge Dakota
JOIN HERE
11/16/2006
23:20:10
| RE: V8 TB or F&B?
IP: Logged
Message:
tb?
|
Fed
GenII
11/16/2006
23:51:51
|  RE: V8 TB or F&B?
IP: Logged
Message:
Throttle Body
Larry...from where would be the best place to order an F&B throttle body?
1993 Dakota CC 3.9 auto
(Rebuilt engine, 19 lb. injectors, ignition & wires, 4.10 gears, LSD
exhaust, intake, lowered 4/4, rear anti-sway bar)
|
boomer
Dodge Dakota
JOIN HERE
11/17/2006
07:22:34
|  RE: V8 TB or F&B?
IP: Logged
Message:
I'd like to know too! I think I lost a little low end when I put my headers on and got rid of my clogged up cat.
|
Joe M.
Dodge Dakota
JOIN HERE
11/17/2006
16:11:10
|  RE: V8 TB or F&B?
IP: Logged
Message:
boomer did you replace that cat
or just run a pipe?
if so thats where some of the bottom end went
|
boomer
Dodge Dakota
JOIN HERE
11/18/2006
13:54:19
| RE: V8 TB or F&B?
IP: Logged
Message:
Just put a pipe in, I thought I might loose some bottom end but a mechanic I know said it dont matter. hard to know who to listen to till you find out for yourself. my old cat was so clogged not having one at all was better than the old one. maybe I'll get a highflow cat.
I still want to know where I can get the F&B throttle body for a good price
|
GB2000
GenIII
11/18/2006
14:45:42
| RE: V8 TB or F&B?
IP: Logged
Message:
$380 and Sam's a great guy to deal with.
http://www.socaldakota.com/performance_mopar_dakotadurangoram_engine_throttlebodies.html
|
boomer
Dodge Dakota
JOIN HERE
11/19/2006
13:18:05
| RE: V8 TB or F&B?
IP: Logged
Message:
wow, those are awesome! too bad they're 380 bucks new.
|
GB2000
GenIII
11/19/2006
14:29:45
| RE: V8 TB or F&B?
IP: Logged
Message:
They go for a ton used too...someone put one on Ebay a while back. I bid like $120 on it and it still ended up going for over $200. And I can never manage to catch the deals when someone's like, "I have a like new F&B tb for sale for $100...I'm just in desperate need for money currently."
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
