Forums
Forum Tools
|
 |
00:08:16 - 12/20/2024
V6 Dakotas
| From | Message |
Walker
Dodge Dakota
JOIN HERE
4/14/2002
13:32:58
|
 Subject: What Cleaner for TB
IP: Logged
Message:
I am going to get a TB from a wrecking yard,I'm sure I will need to clean it. What would be the best cleaner that won't screw up the sensors. Also is there any porting I can do myself to improve performance.
|
Lesley
GenIII
4/14/2002
13:40:52
|  RE: What Cleaner for TB
IP: Logged
Message:
There are spray TB cleaners available which are tolulene. This is a V8 TB you are looking for? In which case, you really shouldn't port it or the bores will be too big. I just bought the TB itself, and used the sensors on my truck. I sprayed the bores thoroughly with the tolulene, and used a lint free cloth to polish them.
97 3.9 CC Sport. Black. Auto 3.55, Quick D Intake, JBA Stainless headers, Autolite 3923s, stainless Borla Turbo XL, V8 TB, FMS 19 lb fuel injectors, Brass cap & rotor, JBA 9mm cables, Borla tip, IAT adjuster. Coming: Boyd Smoothies
|
Walker
Dodge Dakota
JOIN HERE
4/14/2002
14:00:35
| RE: What Cleaner for TB
IP: Logged
Message:
Yea found a V8 tb for $125.00.Thanks for the info.Next upgrade I want injectors which one should I use.I have a 93 Dakota with 3.9 Autolite 3923,Dynomax catback,Cold air. Thanks
|
bernd
*GenIII*
4/14/2002
14:13:07
| RE: What Cleaner for TB
IP: Logged
Message:
I personally use either 3M Throttle Body Cleaner or Berrymans Carb/TB Cleaner. You can mildly modify the throttle body by cutting down the "stone-henge" blocks (front/rear/sides) to 1/4" height, removing the airhorns, and putting a 45 degree radius around the bores. Nothing else is really required. (Polishing the bores hasn't shown any gains...but it sure looks nice!)
1997 Dodge Dakota SLT - V6
Supercharged/Intercooled @ 10# w/Nitrous
14.55 @ 96.01mph
|
Lesley
GenIII
4/14/2002
14:34:01
| RE: What Cleaner for TB
IP: Logged
Message:
Bernd - here's a question, hopefully not a dumb one. Does cutting down the air horns reduce noise? My truck is considerably noisier when I step on the gas, than Tibor's who has one of your ported and polished TBs.
97 3.9 CC Sport. Black. Auto 3.55, Quick D Intake, JBA Stainless headers, Autolite 3923s, stainless Borla Turbo XL, V8 TB, FMS 19 lb fuel injectors, Brass cap & rotor, JBA 9mm cables, Borla tip, IAT adjuster. Coming: Boyd Smoothies
|
Geoff
GenIII
4/14/2002
19:34:28
| RE: What Cleaner for TB
IP: Logged
Message:
I have the Flowmetrics and if i just spray the TB cleaner in there it causes it to stick open causing wild revving. I spray it wipe it clean and then lubricate the pivots and locations where the blades contact the bores with Millitec. Never a problem with this procedure
Geoff
2000 3.9L RC Sport. Flame Red. 5-speed, 3.55, Airaid, Vortex Muffler, F&B 48mm TB, 180 T-Stat, Autolite 3923s, IAT Adjuster, Clear Corners, SS Grill Insert, JBA Plug Wires, Underdrive Crank Pulley. Hurst Shifter, Removed Clutch Fan, Sony CDX-MP450X MP3, Infinity Reference Speakers
|
Cecil
Dodge Dakota
JOIN HERE
4/14/2002
19:54:03
| RE: What Cleaner for TB
IP: Logged
Message:
would cutting down the "stone-henge" blocks on a v6 tb, the stock 42mm i think, make any difference?becuase id like to try it to see what it does.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
