| From | Message |
sicminds
GenIII
4/13/2002
18:11:53
|
 Subject: stickey pedal high rpms - bad tb install
IP: Logged
Message:
Got a tb from a 95 5.9L
rpms seem funny and so
does the idle. What cable
will i need to go with the new
tb?
what year and what model
i got a 98 rc
now you know thats..................
sic
|
FazDak
GenII
4/13/2002
21:43:39
| RE: stickey pedal high rpms - bad tb install
IP: Logged
Message:
Did you take the valve off the back of your original TB and put it on the V8 one?
Mine didnt act right untill I used the v6 valve on the v8 TB, I think its called an air bypass valve, not sure though.
Good luck, Scott
|
bernd
*GenIII*
4/13/2002
21:55:14
| RE: stickey pedal high rpms - bad tb install
IP: Logged
Message:
Sic: A '95 model TB won't work properly as the linkage is different and it has EGR holes in the bores (front of bores right above the plates). IAC is also slightly different.
1997 Dodge Dakota SLT - V6
Supercharged/Intercooled @ 10# w/Nitrous
14.55 @ 96.01mph
|
FazDak
GenII
4/13/2002
22:04:57
| RE: stickey pedal high rpms - bad tb install
IP: Logged
Message:
So know for future reference, Brend is the valve I was mentioning the IAC?
I dont have a manuel for Daks.
Thx, Scott
|
sicminds
GenIII
4/14/2002
00:07:07
| RE: stickey pedal high rpms - bad tb install
IP: Logged
Message:
Everything including all sensors fit right just the linkage was funny
now you know thats..................
sic
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
