| From | Message |
BMac
Dodge Dakota
JOIN HERE
4/24/2008
06:02:17
|
 Subject: RE: E3 Sparkplugs
IP: Logged
Message:
I have Halo's in my 98 Dak. Not sure what I will put in my 95, maybe the NGK's.
|
ironhayden
Dodge Dakota
JOIN HERE
4/28/2008
10:17:56
| RE: E3 Sparkplugs
IP: Logged
Message:
what is the part number to run the e3 stock and are you runing one stage colder?
|
J and J Auto
GenII
5/06/2008
02:55:35
| RE: E3 Sparkplugs
IP: Logged
Message:
3.64 is 1 colder
just go to there site and look it up
e3sparkplugs.com
I am running them in my lincoln also and they
are running great 20mpg plus
Larry
J&J Auto
|
verdesardog
Dodge Dakota
JOIN HERE
5/09/2008
01:47:00
| RE: E3 Sparkplugs
IP: Logged
Message:
Just calculated my first tank of gas after installing E3 plugs ... about 1 or 1.5 mpg better. Driving the same, no difference in the "butt dyno" lol
1994 3.9 4x4 club cab
|
Bull Shot
Dodge Dakota
JOIN HERE
6/23/2008
16:49:38
| RE: E3 Sparkplugs
IP: Logged
Message:
I raising the B.S. flag on this
|
J and J Auto
GenII
6/25/2008
23:21:10
| RE: E3 Sparkplugs
IP: Logged
Message:
Raise all the flags you want and than read the A/F
system check post
The e3 and halo are very close
next best is the NGK Vpower
Larry
J&J Auto
|
LeatherNeck
Dodge Dakota
JOIN HERE
7/03/2008
09:18:54
| RE: E3 Sparkplugs
IP: Logged
Message:
Just wanted to share my experience with the E3 plugs. I installed a set of E3.48's 3 months ago, my truck did improve a little. Yesterday, I decided to try one step colder, the E3.64's. For some unknown reason my truck ran very poorly, stumbled, rumbled in the Cat and had no power. The guy at Advance Auto was a good sport and did a defective swap and gave me a new set of E3.48's, truck immediately started running great. I have a 94 SLT, headers, dual exhaust, 5.2 TB, under crank pulley, CPS mod and TPS mod. I figured it was worth a try to see if it would work on my truck.
|
BS
Dodge Dakota
JOIN HERE
7/03/2008
11:59:31
| RE: E3 Sparkplugs
IP: Logged
Message:
I just put in the new E4s and am getting 10mpg better now. Awesome plug.
|
screwuphead
Dodge Dakota
JOIN HERE
7/03/2008
17:08:18
| RE: E3 Sparkplugs
IP: Logged
Message:
Larry not too sure how you came to the conculsion that the 3.64 is 1 colder, i crossed referenced the plugs to the NGK ones and the 3.56 is 1 colder, which from the website is what they recommend i put into my truck.
|
J and J Auto
GenII
7/04/2008
03:56:48
| RE: E3 Sparkplugs
IP: Logged
Message:
Its I beleave 3.64
the 3.56 is stock I think
Cross it from an autolite 3923 1 colder
autolite 3924 is stock heat
That is how I came up with the e3 number and all
others used the same 1 colder e3 and they worked
well for almost everyone who used them
There are some trucks that do not react well to
a 1 colder plug they are very few and I have
never really took the time to find out why
Larry
J&J Auto
|
Jim Carnell
Dodge Dakota
JOIN HERE
5/20/2009
14:42:56
| RE: E3 Sparkplugs
IP: Logged
Message:
what would be the best e4 ore3 plugs for 97 ford
351 eng and a94 chev 351 pickups
|
na
Dodge Dakota
JOIN HERE
5/23/2009
02:40:20
| RE: E3 Sparkplugs
IP: Logged
Message:
just wait for the e5's to come out
|
| | <<Original Post <<Previous Page P 2 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
