| From | Message |
Scotty
Dodge Dakota
JOIN HERE
4/12/2002
19:35:59
|
 Subject: Installed JBA Ceramic headers!!!!!
IP: Logged
Message:
Aloha dudes and duddettes,
i just got done through installing my JBA Ceramic Headers i bought from Bernd at www.speedtweaks.net they are awesome!!! nice beautiful tone....... some HP. best mod ever!! next is the TransGo shift kit i was suppose to install last weekend. i'm opting for this thursday. oh well...... jus my 2 cents!!! hey BERND thanks for everything!!!
MAHALO,
Scotty so HOTTY!
|
justin
Dodge Dakota
JOIN HERE
4/12/2002
19:46:00
|  RE: Installed JBA Ceramic headers!!!!!
IP: Logged
Message:
how much of a gain ya think?
|
bernd
*GenIII*
4/12/2002
20:52:42
| RE: Installed JBA Ceramic headers!!!!!
IP: Logged
Message:
No problem Scotty. :)
1997 Dodge Dakota SLT - V6
Supercharged/Intercooled @ 10# w/Nitrous
14.55 @ 96.01mph
|
Quicksilver
Dodge Dakota
JOIN HERE
4/12/2002
21:40:02
| RE: Installed JBA Ceramic headers!!!!!
IP: Logged
Message:
Are them headers direct bolt on to the cats or do you have to change anything ,i would rather like keep whats left of my cats on?
|
Lesley
GenIII
4/12/2002
23:24:54
| RE: Installed JBA Ceramic headers!!!!!
IP: Logged
Message:
Way to go Scotty. Doesn't the engine bay look so much cleaner now huh?
97 3.9 CC Sport. Black. Auto 3.55, Quick D Intake, JBA Stainless headers, Autolite 3923s, stainless Borla Turbo XL, V8 R/T TB, FMS fuel injectors, Brass cap & rotor, JBA 9mm cables, Borla stainless intercooled tip, IAT adjuster. Coming: Boyd Coddington
|
SpeedTuba
GenIII
4/12/2002
23:54:40
| RE: Installed JBA Ceramic headers!!!!!
IP: Logged
Message:
I just installed my JBA headers on Wed. True True. Love it. Man second gear has nice little punch now!
Quicksilver. It's a direct bolt on. It's a little fun getting the bolts on around the header, but no other changes are necessary. The headers go right into the factory Y-pipe and everything from there back, you can keep stock. Of course, if you have the money and want better HP gains, replace the Cat and muffler as well. If you're rich, replace the Y-pipe and all other pipes as well! :)
BTW, If you get a CarSound Cat from Bernd, there is no front or back. Just install it! (Thanks Bernd)
W. Patrick Jones
98 Dakota Sport 3.9L
Emerald Pearl Coat
http://www.geocities.com/wpmjones/
|
LI Blackdak
Dodge Dakota
JOIN HERE
4/13/2002
00:15:06
| RE: Installed JBA Ceramic headers!!!!!
IP: Logged
Message:
what is the gain in the 1/4 from headers(assuming u have intake and exhaust)
some one said that a gibson catback took 1/4 second off his 0-60. will headers do more or less then that
|
LI Blackdak
Dodge Dakota
JOIN HERE
4/13/2002
00:16:07
| RE: Installed JBA Ceramic headers!!!!!
IP: Logged
Message:
i know ive asked this before, but no one will give a strait answer. do headers help jet 2??
|
bernd
*GenIII*
4/13/2002
00:24:03
| RE: Installed JBA Ceramic headers!!!!!
IP: Logged
Message:
Yes.
Jet Stage-II recommends Intake, Exhaust, and 180 degree T'Stat.
The headers are good for about 10-12HP.
1997 Dodge Dakota SLT - V6
Supercharged/Intercooled @ 10# w/Nitrous
14.55 @ 96.01mph
|
bernd
*GenIII*
4/13/2002
00:58:39
| RE: Installed JBA Ceramic headers!!!!!
IP: Logged
Message:
LiBlackDak:
"The JET stage 2 is designed for peak horsepower in cases where the engine has been modified to run cooler and the exhaust system is less restrictive than stock." - Jet website
1997 Dodge Dakota SLT - V6
Supercharged/Intercooled @ 10# w/Nitrous
14.55 @ 96.01mph
|
LI Blackdak
Dodge Dakota
JOIN HERE
4/13/2002
05:25:58
| RE: Installed JBA Ceramic headers!!!!!
IP: Logged
Message:
so headers make the exhaust less restrictive, right?? does jet work better in the summer?
i wanna know the 1/4 ,ile or 0-60 differance that headers will make. 1/2 second 1/4 second whole second, what??
|
Scotty
Dodge Dakota
JOIN HERE
4/13/2002
17:06:17
| RE: Installed JBA Ceramic headers!!!!!
IP: Logged
Message:
dude justin,
from my professional opinion i think its like a 5 to 10 HP gain. again i really felt it going up hill.......
oh and Lesley,
the engine bay is much much cleaner....
Mahalo,
Scotty
2000 Dodge Dakota Flame Red VSixer, Quick D TB, IAT adjuster, Kat Box, straight pipe (no cat converter), Flowmaster Deltaflow 50 series, K & N Cold Air Intake, JBA Ceramic Headers, MSD 8.5mm wires, Autolite 3923's, Borg Warner Brass cap and rotor, FMS fuel injectors, ASP crank pulley, plus many many more......
|
LI Blackdak
Dodge Dakota
JOIN HERE
4/14/2002
01:46:34
| RE: Installed JBA Ceramic headers!!!!!
IP: Logged
Message:
why does every one give thes tiny hp estimates??? if they dyno at 10-15 or whatever, that is what they add.
someone tell me though
1/4 mile or 0-60 or 1/8 before and after headers...i know somone has tested one of these things
|
bernd
*GenIII*
4/14/2002
10:39:48
| RE: Installed JBA Ceramic headers!!!!!
IP: Logged
Message:
If you're looking for 30-40HP from headers, that won't happen...at least not on the DOdge Magnum engines.
1997 Dodge Dakota SLT - V6
Supercharged/Intercooled @ 10# w/Nitrous
14.55 @ 96.01mph
|
LI Blackdak
Dodge Dakota
JOIN HERE
4/14/2002
18:35:51
| RE: Installed JBA Ceramic headers!!!!!
IP: Logged
Message:
I'm looking for 10-20
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
