TopCityDak
Dodge Dakota
JOIN HERE
7/14/2006
17:25:45
|
 Subject: Digital overhead console revisited
IP: Logged
Message:
may get more hits on the v6 board than the custome style board so im just cutting and pasting it over here
just got back from the boneyard and hit paydirt. now i wished that i would have waited on getting the console off of ebay. oh well, i can resell the ebay one lol the only problem with the donor vehicle(00 rango) is that the drivers side was crunched pretty good so i could not get the whole harness. suprisingly the auto dimming mirror looked like it didnt get damaged so i picked that up as well.
i am guessing that i can just hardwire the black, pink and yellow(slots 1, 2 and 7) wires to the existing ones since all they are is for the dome/map light. thats the easy part.
however, where do the remaining 6 wires for the trip computer connect: slot 4 purple/green; slot 5 purple/black; slot 6 blue/white; slot 10 black/lt blue; slot 11 white/black and slot 12 black/tan (or pink?).
also for the 3 wires on the mirror. blue/white, black, and purple/black. where do these connect? thinking the black to the ground, blue/white to the blue/white on the console pigtail, but dont think the purple/black will be connecting to the same on the pigtail. any help will be greatly appreciated
|
