| From | Message |
2000dakota
Dodge Dakota
JOIN HERE
7/08/2006
18:09:39
|
 Subject: Need V6 cam Question answered
IP: Logged
Message:
hey i have a 00 v6 dak, and have been thiniking about either swaping the cam or rockers.
First off who makes aggresive cams for the V6 i know there are a few makers.
i want a streetable one, but one that is gonna actually make power im gona feel. i know KRC has the 200 and 206. i dont know the difference between the two though. and who else makes them?
secondly i know the 1.7 rockers are the ones to go with if you stay with your stock cam. and im guessing 1.6 or stock rockers if you swap your cam?
i found comp cams makes 1.6 and 1.7.
Which one would give me the most power a new cam or new rockers? or both??
thanks!!
|
Scott C
Dodge Dakota
JOIN HERE
7/08/2006
20:11:31
|  RE: Need V6 cam Question answered
IP: Logged
Message:
i have the 1.7 RR's from Harland sharp with the stock cam but they can still be used with a different cam but just pends on how radical of a lift you get on the cam....
Scott C
Royal Auto
|
2000dakota
Dodge Dakota
JOIN HERE
7/09/2006
12:12:02
| RE: Need V6 cam Question answered
IP: Logged
Message:
you have a site i can look at those? did the 1.7s make a big difference alone?
|
vern
Dodge Dakota
JOIN HERE
7/09/2006
12:24:57
| RE: Need V6 cam Question answered
IP: Logged
Message:
2000-no one thing will make a huge differents,EXCEPT for turbo or NO2
a larger cam or rockers will help...
|
N56629
Dodge Dakota
JOIN HERE
7/09/2006
12:32:56
| RE: Need V6 cam Question answered
IP: Logged
Message:
"Which one would give me the most power a new cam or new rockers? or both??"
Both. If you want to try the 1.7's and later add a cam all you have to do is tell the cam grinder that you will be using 1.7's and they will grind the cam to compensate.
|
2000dakota
Dodge Dakota
JOIN HERE
7/09/2006
12:35:29
| RE: Need V6 cam Question answered
IP: Logged
Message:
alrighty, so what are some good 1.7s brands? and ill be going with the cheaper aluminum not the stainless.
Are they easy to install? any special tools invoiled that ill need?
|
SteveBDAK
Dodge Dakota
JOIN HERE
7/10/2006
12:54:25
| RE: Need V6 cam Question answered
IP: Logged
Message:
The 2 most popular roller rockers are Harland Sharp and Crower. No special tools needed. They are both easy to install, but the Crower rockers require a little more time and effort to adjust then the Harland Sharp rockers. If you do go with the Crower brand, I would recommend getting there guide plates.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
