| From | Message |
jason52
Dodge Dakota
JOIN HERE
5/16/2006
21:50:29
|
 Subject: krc valve springs???
IP: Logged
Message:
For $285, are these worth putting on with a cam and 1.6 rockers?
|
N56629
Dodge Dakota
JOIN HERE
5/17/2006
06:34:20
|  RE: krc valve springs???
IP: Logged
Message:
Depends on the cam. For some cams it's an absolute must. Generally it would be needed with over .500 total lift.
|
Joe M.
Dodge Dakota
JOIN HERE
5/17/2006
07:59:44
|  RE: krc valve springs???
IP: Logged
Message:
if your going through the trouble of putting in a new cam
why would you not change the springs?
and no mention if your going performance or stock replacment? but
if you are going performance then yes you want springs to match
as for the RR's they do free up a bit more HP & TRQ by reducing drag
|
J and J Auto
GenII
5/21/2006
01:42:43
| RE: krc valve springs???
IP: Logged
Message:
the stock springs bind at .500 lift any cam with
over .500 they need to be changed
You can run the stock rockers and push rods as
long as you don,t have a regrind were the base
circle was altered than you would need diff
length push rods
The KRC kit comes with all new clips retainers and
valve seals and is a good deal
hughes is about the same price but they are all
seporite parts no kits
Larry
J&J Auto
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
