| From | Message |
GREG K
Dodge Dakota
JOIN HERE
4/12/2006
11:59:16
|
 Subject: horsepower junkie part II
IP: Logged
Message:
if i get hughes engines heads and intake manifold for my 92 v6 what other things will i need to get the full horsepower potential out out my v6 with these mods and what kind of horsepower increase am i looking at, or recomend different mods that will be better other than a supercharger or nos
|
daddio
Dodge Dakota
JOIN HERE
4/12/2006
12:05:57
| RE: horsepower junkie part II
IP: Logged
Message:
if you want the most from an N/A V6, Larry @ j&j is the guy you need to talk to. he posts on here and has a '95 stroker v6 putting down around 300hp to the wheels. i could be wrong but, i think it's about 8g's that he's put into the engine to get there. some would say that's not worth it. i say to each his own. good luck
|
GREG K
Dodge Dakota
JOIN HERE
4/12/2006
14:07:34
| RE: horsepower junkie part II
IP: Logged
Message:
i just want to know what else i need to add to the heads and intake manifold to get the maximum performance out of the combination and what kind of power am i looking at gaining to the wheels also how much power does a 3.9 automatic dak put down to thw wheels
|
Obio3
Dodge Dakota
JOIN HERE
4/12/2006
20:54:55
| RE: horsepower junkie part II
IP: Logged
Message:
Greg.... The people you need to talk to are the ones making the parts your buying. All reputable companies making speed equipment do tests combined with differant parts. They have to be able to answer these questions with in reason. The bottom line is, they can tell you what works best with there parts and exactly what you can expect. No 2 people in here build there engine exactly the same. Although there answers would be true they most likely would not compliment your satisfaction after your done. Just my opinion.
So many problems .... So little time
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
