| From | Message |
nub
Dodge Dakota
JOIN HERE
4/04/2006
01:01:13
|
 Subject: ignition system
IP: Logged
Message:
alright im not very good with this because ive never looked into it, but ive got a heavily modded 3.9. 474 intake, 465 exhaust cam(whats stock lift on cam?), ported heads, increased valve size, and im gonna be going with nitrous so i need a good ignition system for all of it.
any ideas?
i was wondering if i could upgrade the distributor, and what my options are for that?
thanks
|
J and J Auto
GenII
4/04/2006
15:19:20
|  RE: ignition system
IP: Logged
Message:
stock cam 250/264 .432/.432 32 degree overlap
The stock ignition will run fine with nitrous
Larry
J&J Auto
|
OBIO3
Dodge Dakota
JOIN HERE
4/04/2006
16:08:26
| RE: ignition system
IP: Logged
Message:
If you do end up with a miss of some sort while hammering the nitrous, Drop 2 sizes colder on the plugs. Reason I say 2 is If the engine actually does miss, droping one size colder will help but not enough. In some engines even 2 sizes isn't enough. Only way you can get it correct is by experimenting.
So many problems .... So little time
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
