| From | Message |
LI Blackdak
Dodge Dakota
JOIN HERE
4/08/2002
04:54:03
|
 Subject: header hp gain
IP: Logged
Message:
truck performance says jba headers add:
15-20 HP/26 ft lbs Torque to a V6
is that right or is it an exageration??
(assuming u already have intake and exhaust)
do people who have put these on feel a big difference???
|
IntenseDak39
*GenIII*
4/08/2002
08:49:41
| RE: header hp gain
IP: Logged
Message:
not quite that much... but it does help
http://www.geocities.com/intensedak39/index.html?1015106010330
|
bernd
*GenIII*
4/08/2002
09:25:24
| RE: header hp gain
IP: Logged
Message:
12-15HP is more the average.
1997 Dodge Dakota SLT - V6
Supercharged/Intercooled @ 10# w/Nitrous
14.55 @ 96.01mph
|
LI Blackdak
Dodge Dakota
JOIN HERE
4/08/2002
13:39:03
| RE: header hp gain
IP: Logged
Message:
so I would really feel it just like intake and exhaust...even w/o changing the rest of the exhaust system. Is it hard to get the bolts off cause they look all rusty
|
n8 dawg
Dodge Dakota
JOIN HERE
4/08/2002
23:19:05
| RE: header hp gain
IP: Logged
Message:
i was looking to do that adthe guy told me that you ushally have to hat the bolts up to get them off. and is it worth the money to get them????? worth it as in will it make me faster?
|
LI Blackdak
Dodge Dakota
JOIN HERE
4/09/2002
00:58:17
| RE: header hp gain
IP: Logged
Message:
hat them up?????
|
Daddy-D
*GenIII*
4/09/2002
10:35:24
| RE: header hp gain
IP: Logged
Message:
I think he means "heat". Just run the engine, let it cool enough to NOT ignite the rustbuster (Kroil, Liquid Wrench, WD-40, etc.) when you douse the fasteners with the stuff. Do a pre-soak before getting to work. If you drive your truck, you will have to start over - it burns off. Also, if you have a stubborn fastener, try TIGHTENING it - then try to loosen it; sometimes that works better. And keep the Liquid Wrench flowing.
'98 DakSport C/C 3.9 2WD A/T
|
Montag
Dodge Dakota
JOIN HERE
4/09/2002
14:38:19
| RE: header hp gain
IP: Logged
Message:
Hey LlBlackdak, if you do accually put headers on, tell me what kind of difference there is. Headers was the next mod I was looking at buying.
|
LI Blackdak
Dodge Dakota
JOIN HERE
4/09/2002
14:46:33
| RE: header hp gain
IP: Logged
Message:
i think i will in june or july
|
punch
Dodge Dakota
JOIN HERE
4/09/2002
20:29:04
| RE: header hp gain
IP: Logged
Message:
me too, headers for me, thats my next mod!
will take it to a shop for the install though!
|
LI Blackdak
Dodge Dakota
JOIN HERE
4/09/2002
20:30:32
| RE: header hp gain
IP: Logged
Message:
how much u think they charge for that?? could i trust pepboys or do they not do that??
|
justin
Dodge Dakota
JOIN HERE
4/09/2002
20:32:14
| RE: header hp gain
IP: Logged
Message:
i wouldnt trust pep boys, you got any speedshops around you?
|
Cecil
Dodge Dakota
JOIN HERE
4/09/2002
20:52:48
| RE: header hp gain
IP: Logged
Message:
You can do them yourself it's not hard. just get the right tools and go fot it. i did mine myself with no help right out on the street in front of my house.make sure you have a jackstand.
|
LI Blackdak
Dodge Dakota
JOIN HERE
4/09/2002
23:07:51
| RE: header hp gain
IP: Logged
Message:
i dont really need a jack
i can squeeze under since its a 4x4..hehe
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
