| From | Message |
Mar
Dodge Dakota
JOIN HERE
2/27/2006
18:27:18
|
 Subject: Class III Hitch installation
IP: Logged
Message:
Hi there,
I have a 1994 Dodge Dakota Sport 4WD with a step bumper. How difficult is it to install a Class III hitch? If there is drilling is it difficult?
Thanks. Apprciate the advice.
Mar
|
Dan M
Dodge Dakota
JOIN HERE
2/27/2006
22:11:29
|  RE: Class III Hitch installation
IP: Logged
Message:
I installed one on my old 95 CC 4x4. Yes, you need to do some drilling. I needed to remove a couple bolts that supported the bumper and cut them (2 bolts welded to a plate so you can put both in at the same time). It's not that difficult but you need a good drill and bit for metal.
Some shops will do the install for relatively cheap (around $50 as I recall). I purchased mine at TSC when I visited my in-laws. Too bad we drove my wife's car because that TSC would install any hitch they sold for $25.
- Dan M
|
Mar
Dodge Dakota
JOIN HERE
2/28/2006
17:45:08
| RE: Class III Hitch installation
IP: Logged
Message:
Thanks for the reply. I made a few calls today and U-Haul will install for 25.00 plus their having a sale on Class III hitches. Any for 109.95.
I think I will save myself the aggravation and have them install.
Thanks again!
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
