| From | Message |
GMB
Dodge Dakota
JOIN HERE
2/04/2006
17:44:30
|
 Subject: Need Help Removing Oil Pan
IP: Logged
Message:
I am trying to install a new oil pump in my 98 slt 4x4. I am runnig into alot of problems while trying to drop the oil pan. I have the pan loose but I cant get it to drop out. since the truck is 4x4 i think it might be the gear box located right under the pan, and it is not allowing the pan to drop at all. am I going to have to remove this?
thanks
|
cant post
Dodge Dakota
JOIN HERE
2/05/2006
02:08:30
| RE: Need Help Removing Oil Pan
IP: Logged
Message:
remove 1 motor mount bolt and raise that side of
the motor and it will come off just watch out the
pickup hangs down
Larry
J&J Auto
|
GMB
Dodge Dakota
JOIN HERE
2/05/2006
14:04:14
| RE: Need Help Removing Oil Pan
IP: Logged
Message:
I removed the driver side motor mount bolts. What would be the best way to raise the motor without getting in the way of the oil pan?
|
J and J Auto
GenII
2/08/2006
00:25:18
| RE: Need Help Removing Oil Pan
IP: Logged
Message:
a short 2X4 under the hood but be carful what you
pry against than block it up with a few small
pieces of 2X4
Larry
J&J Auto
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
