| From | Message |
Dak-jak
Dodge Dakota
JOIN HERE
1/30/2006
10:49:12
|
 Subject: Autozone fuel pump
IP: Logged
Message:
Just replaced my fuel pump-on friday.
Problem now is - gauge reads almost empty and the light is on ( indicating -almost empty ).
Tank was half full when changed ( lifted box to do it ) , so only conclusion is that 'Master '
manufacturer of pump miswired the sender.
Dodge wiring goes -pump hot - top of sender-bottomof sender-slider-and negative or return of pump . I believe that they wired the sender portion top-slider-bottom .
Should have verified wiring first..
Now I will have to almost redo the entire process..
|
Joe M.
Dodge Dakota
JOIN HERE
1/30/2006
11:30:02
|  RE: Autozone fuel pump
IP: Logged
Message:
you sure you have the float pointed in the right dirrection?
went through the same thing with mine
had to turn the pump 3 times before the gauge
would work & work right
|
?
Dodge Dakota
JOIN HERE
1/30/2006
12:41:12
| RE: Autozone fuel pump
IP: Logged
Message:
IF that were the case it would have been stuck at half full.........= tank was half full..
|
Dak-jak
Dodge Dakota
JOIN HERE
2/06/2006
09:37:35
| RE: Autozone fuel pump
IP: Logged
Message:
Fixed - both problem - used original float arm
Cause of original FAILURE found to be
Plugged filters from DIRTY GAS..
I mostly used ESSO = EXXON , but I believe it
is DIRTY VENEZUELA crude..
Kind of a pain to spend $ 200.00 for more than needed.
when actually about $ 20.00 worth of filters
would have done it nicely..
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
