From | Message |
CluCool Dodge Dakota JOIN HERE
12/14/2005 07:23:45
|
Subject: Sway Bar LInk IP: Logged
Message: I was driving down the road the other day and heard what sounded like a few nuts/bolts fall off my truck hit the road and bounce around a second, but I thought I might have just run something over?
I then noticed a loud clunk noise comeing from my front driver side every time I hit a bump?
I looked at the underside of my truck for a while and found a broken upper bolt on the SWAY BAR LINK on the drivers and the bushings had fallin out also.
I have got the replacement parts and wanted to know if there is anything special I have to do to replace this part?
Or is it just a swap out the old for the new type of deal?
Thanks
|
red Dodge Dakota JOIN HERE
12/16/2005 11:26:38
| RE: Sway Bar LInk IP: Logged
Message: It is very easy to swap out the links. Nothing special needed. I did mine when I replaced my upper and lower ball joints.
|
CluCool Dodge Dakota JOIN HERE
12/17/2005 11:05:27
| RE: Sway Bar LInk IP: Logged
Message: Good to hear it is easy, it looked easy I thought?
I am haveing trouble getting my hands on the CORRECT bushings. The 2 that go on the sway bar link bolt that goes vertical?
The dealer is an option but hard to get to because of the hours they are open.
Any suggestions on where to get them?
|
red Dodge Dakota JOIN HERE
12/17/2005 12:35:45
| RE: Sway Bar LInk IP: Logged
Message: I think I got them at either autozone or advance auto.
|
CluCool Dodge Dakota JOIN HERE
12/17/2005 20:03:18
| RE: Sway Bar LInk IP: Logged
Message: autozone said they don't have them and if i got a dealer part number maybe they can cross ref. them?
I will try to get to the dealer on monday.
i will keep you posted?
|
IowaSQ Dodge Dakota JOIN HERE
12/17/2005 22:33:02
| RE: Sway Bar LInk IP: Logged
Message: as long as you're going to do it anyway, you might want to look into some performance urethane bushings instead of replacement rubber ones.
|
| P 1 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|