| From | Message |
eric
Dodge Dakota
JOIN HERE
11/15/2005
18:32:56
|
 Subject: i have codes
IP: Logged
Message:
ok i did a code check and i came up with these codes po108, po113, po138,and po171 how do i fix these problems please help me its driving me crazy my truck is running so messed up. i added a bottle of octane booster and it made my truck run better but soon as i get low on fuel it starts acting up again.
|
Adam
Dodge Dakota
JOIN HERE
11/15/2005
18:46:23
| RE: i have codes
IP: Logged
Message:
P0108 Manifold Absolute Pressure/Barometric Pressure Circuit High Input
P0113 Intake Air Temperature Circuit High Input
P0138 O2 Sensor Circuit High Voltage (Bank 1 Sensor 2)
P0171 System too Lean (Bank 1)
there ya go...hope that helps any.
>http://www.obdii.com/codes.html<
|
schmidtmike
Dodge Dakota
JOIN HERE
11/15/2005
19:06:53
| RE: i have codes
IP: Logged
Message:
do a visual inspection of all of your wiring underhood, and try hooking up a scan tool to the vehicle and measure the signals from each sensor. Compare them with factory specs, and try cleaning connections before condemning a faulty/out of range sensor. Try hooking up a vacuum gauge. Check O2 sensor pattern with an oscilloscope. Don't throw parts at it (or sh!tty octane booster) until you know what's wrong.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
