| From | Message |
cbsdakota
GenIII
 
4/03/2002
06:21:39
|
 Subject: Intense, how do you like 4.10's
IP: Logged
Message:
I am thinking about getting a set of Richmond 4.10's for my truck. The 3.55's are just way too d@mn high. When you take it easy on the gas, if you ever do, do you still get decent MPG on the highway? Since I live in England, the speed limit (or minimum if you are in front of a crazed Brit) is 70, so I run between 70 and 80 all the time. Want at least 16mpg.
Airaid, 50 Series Delta Flow Flowmaster, Lund Elite Bed Cover...
Coming soon: Cleaned up factory V8 TB and custom ported intake manifold...
|
Montag
Dodge Dakota
JOIN HERE
4/03/2002
13:25:21
|  RE: Intense, how do you like 4.10's
IP: Logged
Message:
is that 70 kph or mph?
|
IntenseDak39
*GenIII*
4/03/2002
14:31:49
| RE: Intense, how do you like 4.10's
IP: Logged
Message:
i don't have the 4.10s yet... maybe REAL soon though... been selling stuff to get moneys. I think that Richmond makes only for the 96 and earlier Daks because the website shows only 27 spline axles (xx-96) but we have 29 spline. i think that's what it is... check out motive gear. they have them for our axles and cost a little less
intense
http://www.geocities.com/intensedak39/index.html?1015106010330
|
FazDak
GenII
4/03/2002
15:41:52
| RE: Intense, how do you like 4.10's
IP: Logged
Message:
Intense, axle splines shouldnt matter for the ring and pinion, they dont touch the axles.
The carrier where the open or limited slip part does matter though.
I'll be 4.10ing it in about a week!! cant wait.
Scott
|
IntenseDak39
*GenIII*
4/03/2002
18:07:00
| RE: Intense, how do you like 4.10's
IP: Logged
Message:
i didn't mean axles... just check out www.summitracing.com or www.truckperformance.com
http://www.geocities.com/intensedak39/index.html?1015106010330
|
FazDak
GenII
4/03/2002
20:04:45
| RE: Intense, how do you like 4.10's
IP: Logged
Message:
Sorry, you meant the pinion splines, I should have known, my bad.
I have a 94 8 1/4 I would part with now if anybodys interested?
Scott
|
cbsdakota
GenIII
4/04/2002
04:11:08
|  RE: Intense, how do you like 4.10's
IP: Logged
Message:
Grrrr, catalog didn't say anything about splines so I went to the site and sure enough the one I am looking at is for 27 spline. Didn't realize there was a difference. Is motive gear any good. When I emailed Randy's R&P they said they had the gears for the 8.25" but didn't specify spline #'s. Not sure what brand they quoted me either.
Airaid, 50 Series Delta Flow Flowmaster, Lund Elite Bed Cover...
Coming soon: Cleaned up factory V8 TB and custom ported intake manifold...
|
cbsdakota
GenIII
4/04/2002
04:13:13
| RE: Intense, how do you like 4.10's
IP: Logged
Message:
What is a fair labour cost or at least how many labour hours for installing the gears and a sure grip. These British people like to stick it to Americans. I don't want to get screwed too bad.
Airaid, 50 Series Delta Flow Flowmaster, Lund Elite Bed Cover...
Coming soon: Cleaned up factory V8 TB and custom ported intake manifold...
|
IntenseDak39
*GenIII*
4/04/2002
08:54:00
| RE: Intense, how do you like 4.10's
IP: Logged
Message:
the guy here in texas is going to do it for $200. that's what he charges for any kind of diff work. i wish i could do it because i have done everything else to my truck... but lack the precision and tools to do that job and the extra $ to fix it when i don't get it right the first time
intense
http://www.geocities.com/intensedak39/index.html?1015106010330
|
FazDak
GenII
4/04/2002
12:02:33
| RE: Intense, how do you like 4.10's
IP: Logged
Message:
You guys should be able to get yolks for any spline pinions out ther?
When I put the 4.10's in my Chally I had to get a corse spline yolk because the stock was fine and Rickmond gears are corse.
You may even just be able to use a yolk from an earlier model.
Scott
|
cbsdakota
GenIII
4/05/2002
07:54:06
| RE: Intense, how do you like 4.10's
IP: Logged
Message:
So, your saying I could just swap something out of my diff from an earlier one and go with the 27 spline Richmond gears? $200 sounds alright. Does that include gears and sure grip?
Airaid, 50 Series Delta Flow Flowmaster, Lund Elite Bed Cover...
Coming soon: Cleaned up factory V8 TB and custom ported intake manifold...
|
LI Blackdak
Dodge Dakota
JOIN HERE
4/05/2002
08:34:10
| RE: Intense, how do you like 4.10's
IP: Logged
Message:
wouldn't 4.10s decrease your top end power while increasing your low end? also won't they make your ride more jerky?? I have 3.92s and my truck leaps off the line and then dies from 30-60. It jerks you back when it shifts but thats about all it can do. but thats just me and my truck is real heavy being a 4x4 and all.
btw if this sounds stupid at all just ignore it because I'm tired and I'm not really sure what I'm typing ;-)
|
IntenseDak39
*GenIII*
4/05/2002
08:42:22
| RE: Intense, how do you like 4.10's
IP: Logged
Message:
it doesn't really decrease your top end. it just causes you to run higher rpms at higher speeds. it does help out the launch a lot but not top end. i have nitrous to cure any top end problems ;)
LI Blackdak,
have you relocated your IAT or adjusted your TPS or your TV cable... just some (almost) free mods. and you will notice a difference... the most probably from the IAT.
intense
http://www.geocities.com/intensedak39/index.html?1015106010330
|
LI Blackdak
Dodge Dakota
JOIN HERE
4/05/2002
08:44:55
| RE: Intense, how do you like 4.10's
IP: Logged
Message:
nitrous works lol
how do you do the IAT thing..on speedtweaks, right?
whats the TPS/TV cable?
any negative side effects?
how much of a difference?
|
IntenseDak39
*GenIII*
4/05/2002
09:05:52
| RE: Intense, how do you like 4.10's
IP: Logged
Message:
i sent you an email.... hope that's a good address.
intense
http://www.geocities.com/intensedak39/index.html?1015106010330
|
FazDak
GenII
4/05/2002
23:08:56
| RE: Intense, how do you like 4.10's
IP: Logged
Message:
cbs, I cant say for sure that a yolk form an earlier Dak would work (never tried it myself) but knowing how Mopar does things I'll bet its safe to say you could swap your 29 splined for 27 to go with your gears, I mean an 8 1/4 is an 8 1/4, you know?
Write Mopar Performance, they may be able to tell you like asap.
Good luck, Scott
|
Lil
Dodge Dakota
JOIN HERE
1/07/2004
18:28:02
| RE: Intense, how do you like 4.10's
IP: Logged
Message:
nitrous works lol
how do you do the IAT thing..on speedtweaks, right?
whats the TPS/TV cable?
any negative side effects?
how much of a difference?
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
