| From | Message |
Clu Cool
Dodge Dakota
JOIN HERE
11/07/2005
17:06:12
|
 Subject: ASP Pulleys Install
IP: Logged
Message:
Hey what do you know! Finaly I got my Asp Pulleys.
I ordered them October 7 and today is November 7. So I guess a month is not that bad.
Question I have a 99 3.9L and I bought the ASP Crank & Alt. Pulleys, so what belt do I need?
I think it is a 95" 6 rib gates part#K060950
Does any one know if this is right?
Also what would you rate the difficulty level of this installation? I have changed the belt before, but never tried removeing the pulley?
Am I going to need any special parts/tools?
Thanks
|
daddio
Dodge Dakota
JOIN HERE
11/07/2005
17:11:03
| RE: ASP Pulleys Install
IP: Logged
Message:
the crank pulley is a snap. take the belt off and then take out the 4 bolts that hold the pulley to the dampener. have not done the alt pulley(i am wary of battery charging issues)but, with an impact wrench it should come right off.
|
Adam
Dodge Dakota
JOIN HERE
11/10/2005
20:25:56
| RE: ASP Pulleys Install
IP: Logged
Message:
I was thinking of doing that...probably just going to go with the crank though. Tell us how it works out.
|
daddio
Dodge Dakota
JOIN HERE
11/10/2005
21:00:26
| RE: ASP Pulleys Install
IP: Logged
Message:
how much are thsoe crank pulleys going fo now anyway? i bought mine used from someone off of another dak site for 25 bucks. it was worth it to me. the engine seems to rev a little quicker than before.
|
Hammerhead
GenIII
11/10/2005
21:08:23
| RE: ASP Pulleys Install
IP: Logged
Message:
I'm curious as well. I should have my underpulley next weekalong with a couple of other goodies.
2000 CC 3.9
intake, Dave's bored 48mm tb, superchips
Ordered - Magnaflow cat-back exhaust, JBA power wires, Denso plugs, ASP pulley
- JBA headers
|
95V6
GenII
11/10/2005
21:09:32
| RE: ASP Pulleys Install
IP: Logged
Message:
the cheapest crank pulley is $50 at summit racing.
95 3.9L 4WD V6, K&N, Gibson exh, JBA hdrs, JET stage II, MSD 6A, Rancho shocks and more..
|
CluCool
Dodge Dakota
JOIN HERE
11/10/2005
21:24:12
| RE: ASP Pulleys Install
IP: Logged
Message:
Well I still haven't got around to installing because I am Not sure on the belt size? And I have been busy, but I thought I was Told Gates belt#K060950. If I put the crank and alt pullies on. Which I plan too, and a diiferent belt size for just the crank pulley.
Does anyone know where to find the answer to this question?
Also do I have to have an impact wrench or can I take the 1 bolt on the alt. pulley and the 4 bolts on the crank pulley off with a socket wrench?
They aren't reverse threded are they?
Thanks for the help.
I'm not sure if these questions make me look stupid, but I need some help??
|
CluCool
Dodge Dakota
JOIN HERE
11/10/2005
21:27:28
| RE: ASP Pulleys Install
IP: Logged
Message:
By the way daddio I paid abot 105 with shipping from socaldakotas, but since I've ordered they changed the website and it appears they don't list them on the site anymore. Maybe they do I didn't look really hard for them.
ANd help me find this BELT#
|
95V6
GenII
11/10/2005
21:46:19
| RE: ASP Pulleys Install
IP: Logged
Message:
Look at http://www.aspracing.com/frame.htm . You need part # K060923 Gates for your pulleys.
95 3.9L 4WD V6, K&N, Gibson exh, JBA hdrs, JET stage II, MSD 6A, Rancho shocks and more..
|
Hammerhead
GenIII
11/10/2005
21:53:18
| RE: ASP Pulleys Install
IP: Logged
Message:
I ordered my pulley through troyerperformance.com. For a 1999 changing both pulleys they suggest a 95" belt. I can't guarantee its the belt size you need because it may be a slightly different pulley, but I can't imagine it being to far off of that.
2000 CC 3.9
intake, Dave's bored 48mm tb, superchips
Ordered - Magnaflow cat-back exhaust, JBA power wires, Denso plugs, ASP pulley
- JBA headers
|
daddio
Dodge Dakota
JOIN HERE
11/10/2005
21:56:42
| RE: ASP Pulleys Install
IP: Logged
Message:
Clu, if you use an impact on the alt pulley it will come off a lot easier. you wouldn't have to fight to hold the pulley so much. the crank pulley use can just use a ratchet.
|
CluCool
Dodge Dakota
JOIN HERE
11/11/2005
21:18:29
| RE: ASP Pulleys Install
IP: Logged
Message:
Hey Thanks for all the replys.
Hammerhead is right it is a K060950 (95") belt that is accordig to 95V6.
How are the pullies working for you hammerhead? Any alternator issues?
95V6 if I only had the crank pulley it is the belt # K060923, but I have the crank and alternator pulley so it is the belt #K060950, but the chart helped thanks.
Daddio if I had access to an impact wrench I'd use it but I will have to muscle it cause thats all I got.
|
Hammerhead
GenIII
11/11/2005
22:10:13
| RE: ASP Pulleys Install
IP: Logged
Message:
You're welcome Clu. I haven't received mine yet, but I should have it in the next few days. I'll probably install it next weekend.
2000 CC 3.9
intake, Dave's bored 48mm tb, superchips
Ordered - Magnaflow cat-back exhaust, JBA power wires, Denso plugs, ASP pulley
- JBA headers
|
steveBDak
Dodge Dakota
JOIN HERE
11/12/2005
18:31:05
| RE: ASP Pulleys Install
IP: Logged
Message:
Keep in mind that that is a 95" belt only if you use both pulleys. If you just go with the Crank pulley, the you will need a different size belt than a 95". If I recall I am running a 96.5" with just my crank pulley.
|
CluCool
Dodge Dakota
JOIN HERE
11/17/2005
18:30:15
| RE: ASP Pulleys Install
IP: Logged
Message:
Alright. I got the ASP Pulleys on!! After a battle with a bunk tensioner pulley that also got replaced, the Crank and Alternator pulleys are changed!
I noticed a little more seat of the pants HP's, but the alternator pulley does cause me to have a variation in my battery gauge??
When I am at Idle the bat. guage is still in the "safe zone",but at the bottom side of it.
That is with (2) 500 watt amps going.
When I star Driving it returns to normal.
So is it going to hurt my alternator or battery or anything?
It is cold out here so I will have to see if I have any problems starting or chargeing.
I have only put a few miles on them so far.
|
daddio
Dodge Dakota
JOIN HERE
11/17/2005
20:00:39
| RE: ASP Pulleys Install
IP: Logged
Message:
that's exactly why i will not install the alt pulley on my dak. my truck will be 6 yrs old in Jan '06 and i still have the original battery. depending how much low speed driving you do your battery may die a premature death.
|
?
Dodge Dakota
JOIN HERE
11/19/2005
20:35:15
| RE: ASP Pulleys Install
IP: Logged
Message:
Bump??
|
Hammerhead
GenIII
11/21/2005
17:13:08
|  RE: ASP Pulleys Install
IP: Logged
Message:
Pulley was installed on Friday along with plugs and wires. Truck drives really nice and did not notice any drop in my battery gaugeyet, will keep an eye on it just to make sure.
Next up, the cat-back install.
2000 CC 3.9
intake, Dave's bored 48mm tb, superchips, JBA power cables, Denso plugs, Underpulley
Received and waiting to install - Magnaflow cat-back exhaust
- JBA headers
|
CluCool
Dodge Dakota
JOIN HERE
11/21/2005
22:37:10
| RE: ASP Pulleys Install
IP: Logged
Message:
Well I guess you are lucky.
My Gauge is still going up and down.
I Think I might Remove it Soon.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
