| From | Message |
Eric
Dodge Dakota
JOIN HERE
10/29/2005
23:17:21
|
 Subject: missing
IP: Logged
Message:
i changed all my plugs, wires, cap, and rotor. and my 1997 dakota sport is still low in power. it studders and back fires i checked all the wires and made sure they were all in the right places and they were. so what should i do next?
|
Eric
Dodge Dakota
JOIN HERE
10/29/2005
23:20:24
| RE: missing
IP: Logged
Message:
it sounds like the intake is sucking up alot of air also. please help
|
GB2000
GenIII
10/29/2005
23:34:48
| RE: missing
IP: Logged
Message:
Backfires? I'd check your plenum gasket...with the engine off, open the tb and see if you see a lot of oil residue down in the bottom of the intake. If you see a considerable amount, you've got a leak in your plenum gasket. Also would look for vacuum leaks.
Josh Blackshire - Founder, OhioDakotas.NET
Red 98 Dakota Sport - Check it out!
|
Eric
Dodge Dakota
JOIN HERE
10/30/2005
04:09:23
| RE: missing
IP: Logged
Message:
thanks , but i don't have any oil residue down in there i took off the air intake and looked down in there with a flash lite and nothing
|
cuzindoug
GenIII
10/30/2005
06:52:07
| RE: missing
IP: Logged
Message:
Like GB said, check for vacuum leaks as well. You also might want to clean you IAC(located on the back of the TB. held on by 2 torx screws. becareful not to ull or twist the pintle on the end though)
If it ain't broke, fix it til it is.
|
tc
Dodge Dakota
JOIN HERE
11/03/2005
02:20:36
| RE: missing
IP: Logged
Message:
have you checked the ECM for trouble codes? if there are any, it helps alot! mine was doing the same thing @ 65k miles. it was the O2 sensor. I'm not saying that's your problem - there are many causes of
|
thugizum
Dodge Dakota
JOIN HERE
11/03/2005
19:15:07
| RE: missing
IP: Logged
Message:
can someone send me a numbered picture of the firing order i still think its messed up cause i checked everything and i still didn't find a leak i still haven't got any codes checked yet but im going to do that tommorow i'll be back on to let you guys know about the new news... i really would like to take this time out to thank all of you guys for the help...
|
Eric
Dodge Dakota
JOIN HERE
11/04/2005
23:33:08
| RE: missing
IP: Logged
Message:
i went all over to get my truck on the machine to get a code hopefully, and no where i went did the code check. and the dodge dealership is down because of the hurricane that just passed down here in miami. so is there another place can try?
|
cuzindoug
GenIII
11/05/2005
08:20:52
| RE: missing
IP: Logged
Message:
Pepboys, Advanced, autozone, I don't know about napa or carquest.
If it ain't broke, fix it til it is.
|
zzark
Dodge Dakota
JOIN HERE
11/05/2005
08:34:41
| RE: missing
IP: Logged
Message:
thugizum,
email to you
zzark
|
Eric
Dodge Dakota
JOIN HERE
11/05/2005
14:56:24
| RE: missing
IP: Logged
Message:
i checked the firing order and it was good i added a bottle of fuel cleaner. and my truck is running fine. but i got my codes checked and they are P0108, P0113, P0138, P0171 can any one tell me what these codes mean?
|
Adam
Dodge Dakota
JOIN HERE
11/05/2005
16:39:36
| RE: missing
IP: Logged
Message:
There ya go...hope this helps
P0108 Manifold Absolute Pressure/Barometric Pressure Circuit High Input .
P0113 Intake Air Temperature Circuit High Input
P0138 O2 Sensor Circuit High Voltage (Bank 1 Sensor 2)
P0171 System too Lean (Bank 1)
>http://www.obdii.com/codes.html
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
