Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
23:17:58 - 12/19/2024

V6 Dakotas
FromMessage
Relf
Dodge Dakota
JOIN HERE
 Email

10/23/2005
20:39:20

Subject: What size TB w/ my mods?
IP: Logged

Message:
These are the mods I've already done to my 1998 Dakota V6, 4X4.

50mm stock throttle body.
Homebrew CAI.
K&N drop-in air filter.
gasket matched ports & relieved injector bosses on intake manifold.
1/4" aluminum plenum plate.
Gibson side-swept single exhaust.

Next, I will get FMS 19# injectors and I was thinking about getting some Harland Sharp 1.7 rockers after that. I think that my 50mm TB may be too large and sluggish. Should I get a different size, or will the 1.7 rockers work well with the 50?
Thanks for your input.

Relf.




N56629
Dodge Dakota
JOIN HERE


10/23/2005
22:28:16

RE: What size TB w/ my mods?
IP: Logged

Message:
Since you already have the 50 installed, keep it, it's not flowing as much as you think anyway. The 1.7's will help quite a bit. Add a Superchips, some gears and you will be one happy owner.



greg
Dodge Dakota
JOIN HERE
 Email

10/23/2005
22:44:20

RE: What size TB w/ my mods?
IP: Logged

Message:
sorry for posting under this, but i just installed a 48mm F&B and i have exhaust, chip, and intake. It seems like my accelleration is lagging more. It is hard to tell if my HP has changed since i didn't have it tested, but should my acceleration be lagging with bigger tb?



N56629
Dodge Dakota
JOIN HERE


10/24/2005
06:41:45

RE: What size TB w/ my mods?
IP: Logged

Message:
Greg, I've heard that from a number of people. It seems many of them don't care because they gained so much on the top end. If you drive like you are in the Fast and the Ferious then they work. If you drive like you have a truck then they aren't so great unless you go to lower gearing and or a TC.



greg
Dodge Dakota
JOIN HERE
 Email

10/24/2005
07:44:48

RE: What size TB w/ my mods?
IP: Logged

Message:
thanks N56629, I am going to adjust my TV cable, which might help a little (didn't do that when i installed it).



N56629
Dodge Dakota
JOIN HERE


10/24/2005
10:40:58

RE: What size TB w/ my mods?
IP: Logged

Message:
Just remove the cable and see if it lines up with the ball stud in a free state. If it does, don't mess with it.



greg
Dodge Dakota
JOIN HERE
 Email

10/24/2005
11:18:34

RE: What size TB w/ my mods?
IP: Logged

Message:
I know this may sound stupid, but which cable is the TV cable, the plastic one coming directly from the back, the outside one from the front, or the one closest to the TB.



N56629
Dodge Dakota
JOIN HERE


10/24/2005
15:34:55

RE: What size TB w/ my mods?
IP: Logged

Message:
I believe it is the one from the back. You should be able to see that it goes to the tranny.



Relf
Dodge Dakota
JOIN HERE
 Email

10/25/2005
12:25:33

RE: What size TB w/ my mods?
IP: Logged

Message:
Alright greg, enough with hijacking my post! haha.

N56629, I don't think I want to change my gears, but do you think adding the rockers will help balance out the large TB?

Relf.



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.