| From | Message |
daveshotdako
GenIII
 
10/06/2005
09:33:16
|
 Subject: 2000 tb on a 94?
IP: Logged
Message:
i have a bored throttle body off of my 2000 quad cab v6. will this work on a '94 dakota. i have read that until '95, they had egr ports on the tb bores. any advise would be greatly appreciated.
GET IN, SIT DOWN, SHUTUP, AND HOLD ON
|
daddio
Dodge Dakota
JOIN HERE
10/06/2005
10:23:52
| RE: 2000 tb on a 94?
IP: Logged
Message:
there was a post on here somewhere that someone had a pic of where the slots were and a desc of what they did. it may have been N56629?
|
GB2000
GenIII
10/06/2005
13:48:42
| RE: 2000 tb on a 94?
IP: Logged
Message:
I'll save some searching...
Cure for the 1494 Blues
It's about putting an older tb on a newer truck...so you'd just have to figure out how to go about reversing the directions. I think all you gotta do is plug the right holes, but I'm not positive...never tried it before.
Josh Blackshire - Owner, Ohio Dakotas .NET
Red 98 Dakota Sport - Check it out!
|
daveshotdako
GenIII
10/06/2005
14:17:33
| RE: 2000 tb on a 94?
IP: Logged
Message:
thanks gb2000. the problem is that i am trying to sell a non egr tb to someone with an egr. that is what i need to know if that is possible or not. if not i can get an older egr tb to bore for him instead.
GET IN, SIT DOWN, SHUTUP, AND HOLD ON
|
J and J Auto
GenII
10/08/2005
15:50:38
| RE: 2000 tb on a 94?
IP: Logged
Message:
When you do this a lot of the trucks will have
idle issues
You can use 2 plugs on the base and redrill the
vac port but its a lot of un nessasary work
Better off to get a 92 to 95 EGR type
Larry
J&J Auto
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
