| From | Message |
paul
Dodge Dakota
JOIN HERE
9/23/2005
22:04:53
|
 Subject: idle speed
IP: Logged
Message:
I put a v8 throttle body on now the idle speed is around 950 almost too high to pass emissions does anyone know how to lower the idle .
|
Adam
Dodge Dakota
JOIN HERE
9/23/2005
22:08:58
|  RE: idle speed
IP: Logged
Message:
Eat my *ss out you fag!
|
paul
Dodge Dakota
JOIN HERE
9/23/2005
22:13:10
| RE: idle speed
IP: Logged
Message:
hey little dick what is your problem
|
cuzindoug
GenIII
9/23/2005
22:29:29
| RE: idle speed
IP: Logged
Message:
The V8 TB shouldn't have affected your idle speed. I know mine wasn't, if anything, it idles slower. Did you clean your IAC? One other cause might be a small vaccuum meak caused by either the gasket or your MAP sensor vaccuum nipple(or check the manifold nipples themselves). Also, check the throttle plates for any dirt ot debris that might cause them to be cracked open at closed throttle.
If it ain't broke, fix it til it is.
|
cuzindoug
GenIII
9/23/2005
22:49:23
| RE: idle speed
IP: Logged
Message:
Oops, haha meak...should be leak!
If it ain't broke, fix it til it is.
|
paul
Dodge Dakota
JOIN HERE
9/24/2005
10:44:24
|  RE: idle speed
IP: Logged
Message:
thanks Doug I will check and let you know if it was the problem .
|
Relf
Dodge Dakota
JOIN HERE
9/27/2005
15:37:22
|  RE: idle speed
IP: Logged
Message:
Hey paul, If you don't find a leak or it still idles high after cleaning the IAC, you could pop off the little cap that covers the idle adjustment screw and back it off a bit. I had to do that to mine also. Check all that other stuff first, though.
Relf.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
