Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
23:39:33 - 12/19/2024

V6 Dakotas
FromMessage
kota lover
Dodge Dakota
JOIN HERE
 Email

9/08/2005
12:03:26

Subject: help-oil filter problem
IP: Logged

Message:
I have 90 dakota and am having huge problems getting the oil filter off. i have tried everything...first off there is hardly any room to get a tool in and around the filter and now the filter has been destroyed from our efferts to get to off. but still the stubborn thing remains tightly in place. i need some help with some creative ideas to get it off?
thanx



Tek
Dodge Dakota
JOIN HERE
 Email

9/08/2005
12:06:16

RE: help-oil filter problem
IP: Logged

Message:
well, you could always put a compresser on the oil lines and pop it off with pressure... actually, don't do that, I was just joking... I don't have any clues for ya, I would probably have to see it to think of something.



daveshotdako
Dodge Dakota
JOIN HERE


9/08/2005
12:30:45

RE: help-oil filter problem
IP: Logged

Message:
i have had this happen before as well on a buddys dakota. we ended up taking a stout screw driver and driving it through the oil filter and using it for leverage. sounds like the last person who put the filter on overtightened it and/or forgot to smear some oil on the rubber gasket to keep it from melting to the engine. i hope this info helps.



Bob Lincoln
Dodge Dakota
JOIN HERE


9/08/2005
13:48:54

RE: help-oil filter problem
IP: Logged

Message:
A friend had this problem once with a used car he bought. First oil change, the filter wrench bent and snapped. He tried a cap wrench - rounded and slipped. He tried a chain band wrench - it crushed the filter. He tried the screwdriver trick - it peeled the filter apart, leaving the base behind. Now panic-stricken, he finally pried the edge of the base up with a screwdriver and got tin snips in there, and trimmed til he just about reached the center, and broke the base off. Luckily the threads were undamaged. So try the screwdriver to lift the base and then use tin snips (or a dremel tool and cutoff wheel).



dakota hater
Dodge Dakota
JOIN HERE
 Email

9/08/2005
15:16:24

RE: help-oil filter problem
IP: Logged

Message:
take a cutting torch to it, also to the rest of the dam thing. dakota's are nothing but junk from what i've been reading on here. i have a chevy and it's been flawless from the day it came off the dealers lot! it now has 200,130 miles all from me driving it and no one else, so morel of the story, drive the thing yourself and tell others to ****off and it'll never be damaged!



daddio
Dodge Dakota
JOIN HERE


9/08/2005
15:23:36

RE: help-oil filter problem
IP: Logged

Message:
can't you feel the love??????????? hater, i hope you & your chebbie have a long and lasting relation.

anyway, whatever you do be careful of the mating surface for the oil filter to block. you don't want to damage it.



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.