| From | Message |
Adam
Dodge Dakota
JOIN HERE
8/24/2005
22:03:13
|
 Subject: Rockers
IP: Logged
Message:
Ok I'm looking at some 1.7 Crower Rockers and they're running $385. Is that a decent price? I was hoping for something around $250 or less. Am I dreaming here?
'00 CC Sport 4x4 3.9
|
J and J Auto
GenII
8/25/2005
01:52:11
| RE: Rockers
IP: Logged
Message:
Thats about the going price
the crowers require adjusting
The harland sharp extruded alm are a little
cheaper and require no adjusting or baffle mod
to the valve covers
John Mercedes john@southeastrt.com will have the
best price on the harlands
I do have a set of used crowers with 10,000 miles
on them still just like new with all studs lock
nuts and spacer washers in the org crower box
you would have to knock down the baffles in the
covers just lay on floor take a short 2X4 and
knock them down be sure you leave the ends of
the baffle open so the PCV works and you can
get oil into the motor
I have been running the harlands and there great
I have the crower rev kits in my stroker motors
with guide plates
both very good rockers
Larry
J&J Auto
|
Adam
Dodge Dakota
JOIN HERE
8/25/2005
19:47:57
| RE: Rockers
IP: Logged
Message:
What are you wanting for the rockers? e-mail me at down_fallen_03@hotmail.com
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
