| From | Message |
1970dart340
Dodge Dakota
JOIN HERE
7/23/2005
15:51:09
|
 Subject: v8tb
IP: Logged
Message:
I wondering how much a v8tb is . I wanting to put it on a 3.9? How hard is this to do? Thanks
|
bigdave
Dodge Dakota
JOIN HERE
7/23/2005
18:03:35
| RE: v8tb
IP: Logged
Message:
They are very cheap at the junkyards, I just bought 2 for 60.00 out of Dodge Vans with 318s. Have some buddies that want me to modify them with my milling machine.
They are very easy to install.
Remove airhat
Disconnect sensors
Disconnect throttle and TV cables
Remove 4 bolts
Scrape old gasket off
Install in reverse order with new gasket
You may have to get a new V8 throttle cable with the correct ends.
|
1970dart340
Dodge Dakota
JOIN HERE
7/24/2005
15:11:34
| RE: v8tb
IP: Logged
Message:
Do you have any for sale cheap ? Thanks
|
N56629
Dodge Dakota
JOIN HERE
7/24/2005
16:47:04
| RE: v8tb
IP: Logged
Message:
Try eBay, I've picked them up for as little $10, usually more like $25-35.
|
93dak4x4
Dodge Dakota
JOIN HERE
7/24/2005
17:30:55
| RE: v8tb
IP: Logged
Message:
got mine for 40 from a local junkyard. just ask around and then tell them your price if theirs is too high. worst they can say is no.
|
N56629
Dodge Dakota
JOIN HERE
7/24/2005
20:44:56
| RE: v8tb
IP: Logged
Message:
www.car-part.com
|
ccman
Dodge Dakota
JOIN HERE
7/25/2005
01:32:09
| RE: v8tb
IP: Logged
Message:
are the sensors the same?
|
N56629
Dodge Dakota
JOIN HERE
7/25/2005
06:46:08
| RE: v8tb
IP: Logged
Message:
Usually the sensors are the same. I have run across TPS sensors that are different but the TB may have come off a Jeep. Even if the TPS sensor is different they interchange. It's always best to use the original sensors because you know they work.
|
cavdon
Dodge Dakota
JOIN HERE
7/25/2005
16:59:12
| RE: v8tb
IP: Logged
Message:
How much horsepower would a mod like this give?
|
J and J Auto
GenII
7/26/2005
09:16:26
| RE: v8tb
IP: Logged
Message:
15 to 18 hp gain at the wheels is the average
gain low end will remain virtualy the same you
will notice it around 2000 2500 rpm a nice gain
give it 200 miles to learn the new air flow and
start and stop the motor 3 times right after
instal to learn the new idle
use all your V6 sensors because you know they are
good
Do not mod the body at all bolt on as is they flow
around 625cfm just the way they are any more will
effect the low end so don't mod for the V6
Larry
J&J Auto
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
