| From | Message |
devildack
Dodge Dakota
JOIN HERE
7/08/2005
20:45:03
|
 Subject: Engine code 27
IP: Logged
Message:
Injector # control circuit
I drove my truck to work and back and it ran fine..This morning it will not stay running..27 is the code any ideas on how to fix the problem?
Thanx
|
Joe M.
Dodge Dakota
JOIN HERE
7/08/2005
21:48:58
|  RE: Engine code 27
IP: Logged
Message:
just type "engine codes" into the search up top
here's what i found
"27 Injector #1 output driver does not respond properly to the control signal. **
or
Injector #2 output driver does not respond properly to the control signal. **
or
Injector #3 output driver does not respond properly to the control signal. **
or
Injector #4 output driver does not respond properly to the control signal. **
or
Injector #5 output driver does not respond properly to the control signal. (except 2.5L) **
or
Injector #6 output driver does not respond properly to the control signal. (except 2.5L) ** "
whether it covers your year truck or not
but try a search theres a ton of stuff to be found ....... good luck
|
devildack
Dodge Dakota
JOIN HERE
7/08/2005
22:00:43
| RE: Engine code 27
IP: Logged
Message:
Hello and thankyou for your reply!
Yes i did the search and found that as well but the answer i am looking for is how to correct the problem.I understand what the code is but how do i then decode that as to what i need to do under the hood..
Thanx so much for the help!!
|
devildack
Dodge Dakota
JOIN HERE
7/10/2005
09:02:28
| RE: Engine code 27
IP: Logged
Message:
Not sure what the problem could be..It will start but i have to keep my foot on the gas to keep it running.Ran just fine the other day..Other than when i would turn the key it would click a few times before it would start now it is not clicking anymore just fire's right up as long as my foot is on the gas..
Anyways thanx for the help..
|
daddio
Dodge Dakota
JOIN HERE
7/10/2005
09:12:41
| RE: Engine code 27
IP: Logged
Message:
could be a weak battery if it was having problems turning over. load test it. could also be the IAC or a loose or corroded connection on the IAC or TPS. have you tuned it lately? how many miles on it?
|
devildack
Dodge Dakota
JOIN HERE
7/10/2005
19:30:02
| RE: Engine code 27
IP: Logged
Message:
118000 miles..I got it running by disconnecting the battery now it will run but still have to hold the gas at first..Had a strange grinding noise but it went away after i drove it a mile or two..Tommorow i will clean the IAC and throttle body..This has never been done so i am sure it will help..Battery is new optima so i am sure it's not that..
Thanx for the help!
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
