| From | Message |
brett
Dodge Dakota
JOIN HERE
6/24/2005
15:48:34
|
 Subject: ignition timing
IP: Logged
Message:
I have an 87 dodge dakota with a carbed 3.9ltr that I bought recently. I'm trying to set the timing but the emissions decal is gone. Does anybody know the ignition timing setting and the idle speed?
|
DIXIE1776
Dodge Dakota
JOIN HERE
6/27/2005
00:39:04
|  RE: ignition timing
IP: Logged
Message:
'87 SETS AT 12DEGREES BTDC AT 700 RPM.YOU MUST FIRST GROUND THE CARB SWITCH ON THE VAC KICKER AND PULL OFF AND PLUG THE VAC HOSE FROM THEAIR SWITCHING VALVE,ALONG WITH THE 3/16"CAN PURGE HOSEAT THE SOLENOID,AND FINALLY PULL OUT THE PCV VALVE AND LEAVE IT LOOSE UNTIL TIMING IS SET.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
