| From | Message |
Dak 94
Dodge Dakota
JOIN HERE
6/22/2005
09:30:06
|
 Subject: Fuel Pump Replace
IP: Logged
Message:
I need to replace my fuel pump on my 94 3.9 V6 4x4 Dak club cab.One post stated that you can put a 4x4 between the bed and the frame?does any one know how high (how much clearence) you need to lift the fuel pump module outonce you lift the bed ? Thanks for any reply My Email is
qlty@webtv.net Please put fuel pump in subject box so I will read your reply
|
Dan M
Dodge Dakota
JOIN HERE
6/22/2005
22:03:38
|  RE: Fuel Pump Replace
IP: Logged
Message:
http://www.bigworm.com/~danm/dakota/howto/fsu.html
this is for replacing the fuel sending unit, you have to pull the pump out to replace it.
move the bed back so you can access the fuel tank, it's not a clearance issue of the tank to the bed.
- Dan M
|
Roderick Hami
Dodge Dakota
JOIN HERE
6/23/2005
15:55:33
| RE: Fuel Pump Wiring
IP: Logged
Message:
I need to know the +12 volt and - connection on
on the 4 pin Fual Pump Connector.
I woul like to know what the other connections are
Thank You R. Hamilton
E-Mail = hamiltn@bellsouth.net
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
